Manual

34 Multi-Channel Television Sound / Hi-Fi Stereo
oo®®®®m moooQQeeeo®ooooooo®®®®®m moeoQQeeeooo®o®ooo®®®®®e moooQQeeeooooooooo®®®®®m moQQQQeee®®®®ooooo®®®®®m eOOOQQ_
Your DVD/VCR can play tapes recorded in Hi-Fi (high fidelity) stereo, which produces a crisp, clear sound from
the left and right audio channels.Your DVD/VCR also can play tapes recorded in a second audio (usually, that
means your program is recorded in a second language). Of course, your DVD/VCR will play tapes recorded in
monaural (single-source) sound as well.Your DVD/VCR also will record on a video cassette in Hi-Fi stereo or in
second audio, so when you play that tape on the DVD/VCR, it will be in stereo or second audio. Read the
directions on this page to familiarize yourself with the stereo and second audio setups.Then follow the directions
below to record in stereo or second audio, or to play tapes recorded in Hi-Fi stereo.
Understanding Displays
When you watchTV channels through the DVD/VCR, portions of the display shown below will appear when you
press DISPLAY twice.
STOP
SLP
5:40 PM
CH 02
STEREO
SAP
___lf SAPor STEREO appears, the program is available in second audio or stereo.
Even though a program is available in second audio or stereo, you must
program the DVD/VCR to receive or record the program. Follow the directions
below.This display is not available during tape playback.
To play programs in stereo, connect the DVD/VCR to a Stereo orTV as
described on pages 12-13.You will use the red and white AUDIO OUT jacks
on the DVD/VCR.
Multi-Channel Television Sound
To set the DVD/VCR to receive programs in stereo or
second audio, follow these steps.
2
3
PressVCR, then press DISC/VCR MENU so MENU
appears.
Press • or • to selectTV STEREO or SAP (SecondAudio
Program). Press I_ so ON appears beside your selection.
Press DISCIVCR MENU to remove the menu.
Hi-Fi Stereo
Multi-Channel Television Sound system broadcasts are recorded in
Hi-Fi stereo.To play in Hi-Fi stereo the tapes recorded in Hi-Fi
stereo, follow these steps.
PressVCR, then press DISC/VCR MENU so
MENU appears.
Press • or • to select AUDIO OUT.
Then, press I1_.
Press • or • to select HIFI. ON will appear beside HIFI.
AUDIO OUT
I_HIFI [ON]
HONO
J
Press DISC/VCR MENU to remove the menu.
3o4o
©©©©
Youcanonly receiveand record in
stereo or secondaudio programsthat
are broadcastin stereo or second
audio.Youcanonly playa tape in
Stereo or secondaudio if it was
recorded in stereoor secondaudio.
Pleaseseeaboveto determine ifthe
_frogramisin stereo or secondaudio.
SAPisON but the program isnot
broadcastin SecondAudio,youwill
hearand record the programin
normal audio.
Programsare recorded in both Hi-Fi
stereo sound andin monaural(single-
channel)sound.
Theaudio levelof a tape recorded in
Hi-Fi stereowill differ from the audio
levelof a tape not recorded in Hi-Fi
stereo,
Youcanchangeto MONO if youwant
monauralaudio playbad<.Follow steps
1-2,then press• or • to select
MONO at step3. PressDISC/VCR
MENU.HIFIwill disappearfrom the
statusdisplay.
If you playnon-Hi-Fitapeswhile
AUDIO OUT is set to HIFI,HIFIwill
not appearon the statusdisplay.The
tapewill playin monauralsound.
Pleaseseeadditionalnotes onpage
63.