User Manual

Philips Consumer Lifestyle
Page 1 of 2
DVP6800_12 Firmware Upgrade
We have developed a firmware upgrade to improve your product.
Related models: DVP6800_12
Firmware Version: V6.0
Benefits of this upgrade:
1. Improve Divx DRM file playback.
Note: Before you proceed to upgrade, please be reminded that you need to do configuration again each time after firmware
upgrade!
How do I check the current firmware version?
Step1: Check your current version
First check your current firmware version to see if you need to upgrade:
1. Turn on the set.
2. Press <EJECT> on the Remote Control, and then press <INFO> on the Remote Control.
3. The firmware version will be displayed on the TV screen.
4. If your existing firmware version is earlier than this version, [V6.0 100708], please proceed to Step 2;
Otherwise, you do not need to upgrade.
How do I upgrade the firmware?
Step2: Download firmware upgrade
Click the link to download the new firmware package on your computer. The package is compressed into a single ZIP archive.
Step3: Transferring firmware on to USB Flash Drive
Note: You will need a USB flash drive with about 25 Mbytes free space.
1. Extract the firmware upgrade files from the ZIP archive:
Note: ZIP file will not be readable on the set.
Step4: Upgrading the firmware of your DVD player
1. Power up the DVD player and insert the USB flash drive into the USB slot.
2. The DVD player will search for the upgrade files. Once the files have been recognized the player will show a confirmation
screen requesting to start the upgrade:
OPEN
V6.0 100708 DVP6800-12
SERVO: 57.05 REG 2
Press key to continue
Upgrade file detected
Upgrade?
Press PLAY to start