DVR2104 Network Hardware Compression MPEG4 Stand Alone Digital Video Recorder User Guide PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.
SAFETY PRECAUTIONS Power l This video recorder is used on 110V-240V AC and connected to the ground. Confirm the voltage before using. l No using the machine for a long time, cut off the machine power supplies, and pulls out the plug from the AC outlet. Caution l There are two modes of video output: one is BNC, and the other is VGA. They can be switched over via STEP key.The default output is BNC.
The correct order is as follow: clear assistant disc→clear master disc→out setting →save→turn off→restart→ other setting. Advice l Record the television program or program of VCD/ DVDs, please remember absolutely not to infringe on the right of work power and others of the third parties. ii PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.
The characteristic and the function of this video recorder Characteristic: l Use PHILIPS (PNX1500 CMOS DSP chip), offer more high compression and definition. l The PSOS that separate from PC completely is used. l Start quickly, auto protects and auto resume. l The operation is in brief; use convenience, and the operation are similar with VCR. Function: System mode l Professional operate system PSOS, escape from the PC completely, avoid the calculator virus infection completely, good stability, no delay.
l Overwrite l l l Auto alert setting for surplus content. Record before alert function, store in EMS memory Dormancy function is set to reduce the quantity of heat and prolong the use. Search l l l l Search on time/date/list/exact. Search on 1 HD singly, also display the list corresponding. Normal/alert record search. Dairy Replay l More images play at the same time, requesting no sound output while having another image. l Single video and audio play at the same time.
l l l Front panel control IR remote control. Network control Back up l l Through network Through USB2.0 Upgrade l l Through USB……… Through network iii PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.
TABLE OF CONTENTS FEATURE AND FUNCTION. ……………………………………..……… …. 1 simple system operation 1.RECORD OPERATION 1-1.MANUAL……………………… ………………………………………… …3 1-2.ALERT..................................................................................................... 3 1-3.MOTION DETECT .................................................................................. 3 1-4.SCHEDULING......................................................................................... 3 1-5.COMBINATION RECORD ...................
3. general setting......................................................................................... 13 4. record setting........................................................................................... 14 5.alert setting ............................................................................................... 16 6. schedule setting ...................................................................................... 18 7. record searching.............................................
System connection front of the panel map VFD USB Remote Video Out Audio Out VFD 1 ○ 2 ○ 3 ○ 4 ○ 5 ○ 6 ○ 7 ○ Alert LED Timming LED Date Time P .T. Z Alert HDD 8 Network ○ 9 Quality ○ 10 Record ○ 11 Play ○ 12 Step ○ 13 Review ○ 14 Forward ○ 1 PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.
Back panel and connection terminal ① ② ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ③ ④ ⑦ ⑤ ⑧ ⑥ ⑨ ⑩ Audio input 1,2,3,4 Audio output 1,2 Video input 1,2,3,4 Video output 1,2 VGA interface Net connect RJ45 RS232 interface Alert input/output signal and RS-485 signal terminal. the order from left to right is: alert output 1,2;alert input 1,2,3,4;earth;RS-485 Fan base Power line plug 2 PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.
System operation 1. Record operation Record operation can be divided into Manual, Auto, Alert, Motion detect, and the combination operation of above. Manual l l l “ record setting”, Press button “quantity” . press “=” start record, 4-channel start record at the same time, the mark of record appear on the VFD and monitor. manual belong to the normal record. l Press “=” stop manual record. Alert Record l l l l l The parameter in" the alert records image the enactment".
the left of the VFD display area and screens Press" scheduling “and input manager's password to cancel the scheduling of record. Combination record l l The combination record can be use according to need. Such as the scheduling detects record, it needs to combine the scheduling record setting and detect record setting. 2. Play/ search You can use IE browser software or one to one specific software. 1.
User guide Switch on n Confirm the safety notice has already carried out before switching on. n Check the conjunction of system, input, output and the power supply before switching on. n Confirm the image standard (NTSC/PAL) and monitors are met the request. n If there is correct, start the exterior equipments first. n If the DVR is shut down abnormally, no OSD mark will appear when switching on, and the monitor image is black.
early alert has set not to be "0", there will be alert. The video recorder continues to record after the alert is cleared. It will stop recording when HDD is full and show a signal for advice. n In manual recording, schedule recording (auto recording) and alert recording, the degree is increased. Therefore, the manual recording if useless when the system has started the schedule recording, and the alert recording can interrupt the other two. The manual and schedule recordings are normal ones.
n n n n n When “pre-alert recording” is no set to be “0”, press “alert” and the system will be in alert. When there is alert, the system will record the pre-alert condition. When pre-alert recording” is set to be “0”, the system won’t be in alert, and the system won’t record the pre-alert condition. The largest time for alert recording is “pre-alert recording” (less than one minute) plus the time for keeping the alert input effective, and plus “after-alert recording” (less than one minute).
n n n n n Pre-set “schedule recording parameter setting”, and press “schedule” on the front panel to start schedule. The signal“¹” will show. It is an auto way for recording, and it cannot be used with manual recording at the same time. When you press “schedule”, any other button won’t be effective except “guard”, “vision”, “play” and “manual”. Even the system is not under recording, press “record” and the system cannot perform manual recording. But user can set time by pressing “menu”.
n Continually press 8 or7, and the system will have 6 levels of forwarding and 5 levels of reviewing to shift the speed. Searching play Video recorder can perform searching play when it is playing. There are two kinds of searching play: searching depends on time or on the paragraph. The former is through window setting and pressing keys on the front panel performs the later.
n n n n n n n n decides what settings and operations the operator can do. The manager’s and operator’s password can be set and modified in “authority”, after inputting the old password. The new password should be input for twice. The system will only accept the new password when they are the same. You can choose any eight numbers from 0 to 9 as the password, and input them through the number keys in the front panel. The password should have 8 numbers. The system can have no password.
two HDDs (the capacity of HDD can be different.) When installing the second HDD, please set it “slave” as the instruction of the manufacture. Otherwise, the system won’t work. n The second HDD can work as an “assistant disc” to store information and operate. The choice of HDD is set through “choose working disc”. When the slave is confirmed as the working disc, the playing and searching will be operated in slave, but the recording is still on the master.
Record searching n n n Press “searching”, and the list will appear.
System setting Before using video recording, set the system according to own needs, otherwise the video recorder will perform following the settings in the factory. (For further information, please read “system management”) 1. Enter menu 1. In the live monitor, press “option” in the front panel. If the system has password, “Please Input password” will appear, as below: Please Input Password: 2. Operating password has two levels: manager’s (super users) and operator’s (users).
1. 2. 3. 4. 5. 6. General setting is mainly about time, date and network IP settings. Time and date setting: set the recording time. Press the number keys and input the year, month, date, hour, minute, and second to check the time. After that, press ”setting” and the time setting gets into effect at once. Network setting: set the network identifier of the video recording. Only when the setting is right can the user enter the video recording through the user’s soft disc.
1. Recording setting is used to set the baud rate, frame rate and working mode of HDD when using manual recording. 2. Choose picture: choose from ”all”, “picture 1”, “picture 2”,“picture 3”and “picture 4” to set the picture. 3. Setting effect: when the user has chosen either one from the four pictures without pressing the “setting effect”, the system will play the four pictures instead of one. 4. Quality: the quality of recording has eight levels: 1-7level and user-setting. 5.
Disk Full Information The disk is full. If recording needed, choose one of the following steps: n Set auto overwriting mode n Empty disk n Change disk Press“clear”to stop the buzzer ringing and exit Status 5. Alert setting Move the cursor to “alert setting”, and press è to enter the following window: 1. 2. 3. 4. 5. 6. Alert setting is used to set the alert mechanism and the working parameter of the alert. Time before/after: it is to set the length of the recording before/after the alert. Beg.
7. 8. 9. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. period of time. Alert upload: the system will automatically stop uploading when it reaches the set time. Auto-inspect the sentries time: after setting it, the video recording will output an alert in the set time. It has to be cleared by hand. It is used to check whether the guard is on duty and whether the video recording is working well.
6. Schedule setting Press ”option”, choose ”schedule setting” from the system setting menu, press è and enter the following window: 1. Circle: (eight options) workday, weekday, Monday, Tuesday, Wednesday, Thursday, Friday, and Saturday. Workday, weekday, Monday and Tuesday can be set between Monday to Sunday; Wednesday, Thursday, Friday, and Saturday set as the date (month/date). 2. Period of time: it is to set the period of time for schedule recording.
7. Record searching Press “option”, choose “recording searching” in the system menu press è to enter the following window: 1. 2. 3. 4. 5. 6. 7. 8. Recording searching is used to search the recording information. The user can choose the following options to search the information. Input the time: input the beginning and end time of the recording. Input the card NO.: input the bank card NO. of the recording.
1. 2. 3. 4. 5. 6. 7. 8. 9. The video recording provides several kinds of information backup. The user can set the backup time, mode, category, facility and other parameters. Backup facility: USB, IDE, Network can be used as backup facilities. Backup mode: it is used to deal with the backup facility with the information on it. It has two options: overwrite and advanced. Overwrite means to cover the old information; advanced means to add the new information behind the old one.
9.Detect Press “detect”, menu press è to enter the following window: 1. Choose picture: picture 1, picture 2, picture 3, and picture 4. The picture can be set independently. 2. Setting effect: when the user has chosen either one from the four pictures without pressing the “setting effect”, the system will play the four pictures instead of one. 3. Detect recording: it is the detection recording catalogue with normal and alert to choose from.
independently. When setting, the picture and its number appear on the screen. User can also press “next picture” to choose the picture that needs setting. 13. Attention: The alert of information lost and screen cover will only be rang in the alert state. 10.system management Press “Manage”, choose “system management” in the system menu press è to enter the following window: 1.
5. Default: also called pre-setting, it is the standard setting when the video recording is examined and left the factory, and it is used as the foundation of changing other settings. User can set it according to his own need. When the setting is in chaos or not up to the expectancy, press “get back the default” and set it again. 6. Progressing setting: 7. In senior setting, input the manager’s password to change the seven levels of recording baud rate, or get back the information also.
8. Get back the information: if user inadvertently formats HDD and loses the information, he can get the information back. Attention: be careful in this function. The company will not be responsible to the information lost or destroyed because of wrong operation. 9. 11.Authority Press “option”, choose “authority” in the system menu press è to enter the following window: 1. 2. 3. Password degree: “manager’s password” and “operator’s password” two choices.
4. default, the operator only gets the right of “recording searching”. Attention: be careful to authorize in order to keep the video recording work well. 12.Notes: Press “option”, choose “assistant setting” in the system menu press è to enter the following window: HDD:HDD information. For example: Model: Edition:5.034 Date of edition: 3/17/2005 HDD quantity:1 HDD capacity:41.2 Gs, surplus:40.
Display of running state Besides displays on the front panel, this machine can also show the date, time and the running state on the monitor screen. Display of running state There are some signals on the screen, as below: alram quality record Date&time state If no signal on the screen,press “display” on the front panel, the running line will show. Press it again, the state of HDD will show, press it for the third time, the line will disappear.
DISPLAY OF HDD USAGE when the basic function of running and time has shown on screen,press “display”will appear a color signal to show the usage of HDD. Empty Alert record used Normal record used 13.62 9.34 15.95 G(1000M) Overwrite The color means the percent of the usage HDD; you should see according to the direction which arrow direct. The yellow means the way of overwrite. If no yellow appear ,means the “auto overwrite” set as “no”. (The related system setting chapter for details sees).
Main standard and parameter Item Compression standard Video signal Video input Video output Audio input Audio output Alarm input Alarm output Alarm mode Network mode Backup mode Specification MPEG-4 PAL/CCIR,625 lines,50 fields/second Composite:1.0V p-p/75Ω,BNC linker×4 Composite:1.
Exterior size 435mm External dimension Model. (L)x(W)x(H) mm 435x360x63 Weight (kg) 4 Package contents Description Quantity 1 1 1 1 DVR POWER CORE ADAPTOR USER GUIDE (CD) 29 PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.