- PHILIPS Digital Video Recorder User Guide

8
n Pre-set “schedule recording parameter setting”, and press “schedule” on the
front panel to start schedule. The signal“¹” will show.
n It is an auto way for recording, and it cannot be used with manual recording at
the same time. When you press “schedule”, any other button won’t be
effective except “guard”, “vision”, “play” and “manual”. Even the system is not
under recording, press “record” and the system cannot perform manual
recording. But user can set time by pressing “menu”. The other setting will be
effective when “schedule” is pressed again next time.
n Press “schedule” and “REC” can change to manual recording, but you should
input a correct password.
n Alert recording is effective when the system is schedule recording.
n It is related to the time; please check the system date and time before using.
When the power is shut off, the schedule recording has no use.
If the time when you start power lock is just in the schedule record
period, press “schedule”, and the system will start recording
automatically.
If the machine is dual-operation, when the system is playing and
the time has reached the schedule, schedule recording will start as
background.
For further information, please read “schedule recording
parameter setting” in “system setting”.
Play
n When the video recorder stops recording，press “play” and the video recorder
will start to play.
n Press “play” while the video recorder is recording, then, playing is active while
recording is as background.
n Pressing “play” when the video recorder stops recording, the video recorder
always begins from where the recording stopped last time or the latest
recording, no matter the recording is a normal one or an alert one.
n When the recording finishes playing but no “play” have been pressed, the
video recording will automatically play from the very beginning. For example,
if the latest is a normal recording, the video recorder will play the first normal
recording; if it is an alert recording, the video recording will play the first alert
recording. It only stops when you press “play”.
n When the video recording is playing, press “pause” and the performance will
stop for a while. Press “pause” again, the next recording is played. Continually
press “pause”, it will play the recordings one by one sequentially. Press “play”
and it will play normally.
n Press “play” when the video recorder is forwarding or reviewing, it will play
normally from the current position of forwarding or reviewing.
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn