VoiceTracer Audio Recorder DVT2110 DVT2810 User manual
Table of contents 1 Important 3 2 Your VoiceTracer audio recorder 6 Product highlights What's in the box Overview of your audio recorder 6 6 7 3 Get started Charging the battery Turn the device on and off Key lock Connect to a computer Set the date and time Set the device language 4 Recording Record a file Edit a file 5 Playback Play back files Delete files 6 Settings Settings mode Recording settings Playback settings Device settings 8 8 8 8 9 9 9 10 10 10 11 11 11 12 12 12 13 13 7 Device and
1 Important Hearing protection Observe the following guidelines when you use headphones: Do not make any adjustments and modifications that are not described in this manual. Follow all safety instructions to ensure proper operation of the device. The manufacturer assumes no liability for damages resulting from non-compliance with the safety instructions. Safety instructions • Protect the device from rain and liquids to prevent damage to the device or a short circuit.
Canada Disposal of your old product Rechargeable Li-ion battery: Europe A crossed-out wheeled bin symbol attached to a product indicates that the product is covered by the European Directive 2011/65/EU. Please get informed about the local separate collection system for electrical and electronic products. Please act according to your local rules and don’t dispose of your old products with your normal household waste.
About this user manual Find a quick overview of your device on the next pages. For detailed description, see the following chapters of this user manual. Read the instructions carefully. Symbols used Tip • This symbol identifies information that helps you to use your device more efficiently and simply. Note • This symbol indicates notices which you should observe when handling or operating the device. Caution • This symbol warns of damage to the device and possible data loss.
2 YourVoiceTraceraudio recorder What's in the box We are delighted that you have chosen a Philips device. Visit our website for comprehensive support, such as user manuals, software downloads, warranty information and more: www.philips.com/dictation.
1 Microphone 2 Record/Status LED 3 Display 4 Left function button 5 Middle function button 6 Right function button 7 Up button 8 Backward button 9 Record button 10 Down button 11 Forward button 12 File list/Back button 13 Play/Stop button 14 Power/Lock switch 15 Reset button 16 Headphones jack 17 Speaker 18 USB Type-C port 19 Eye for wrist strap Overview of your audio recorder 1 1 2 3 4 6 5 7 8 11 9 10 12 13 1 1 16 14 15 18 17 19 Your VoiceTracer aud
3 Get started Turn the device on and off To turn the device on or off: Caution • Before you connect your VoiceTracer, first read the safety instructions (see Safety instructions). • Slide and hold the Power switch on the right side of the device downwards for three seconds. Charging the battery Charge the built-in battery before you use the device for the first time or if you haven’t used it for an extended time period.
Connect to a computer Set the device language You can use your recorder as a USB mass storage to conveniently store, back up and move files. Link the device to a computer with a USB cable. Your recorder will automatically be recognized as a mass storage device. You don’t need to install any software. You can always change the language of your device. For more information on how to connect your device to a computer, see the illustration in Charging the battery.
4 Recording Record a file Note 3 Press the Record button to start recording. X The recording screen is displayed. X The Record/Status LED illuminates red. 4 Press the Record button again to stop recording. X The recording is saved to the preselected folder. Edit a file • Be careful not to cover the microphones while recording. This might result in a lower recording quality. • If the recording time of your current recording exceeds the available storage capacity, the recording will stop.
5 Playback Play back files from a selected folder 1 In stop mode, press the File list button. X All voice recordings are displayed. Play back files 2 Press the Left function button panel. Note 3 Press the Up/Down buttons to navigate to your desired folder and then press the Record button to confirm your selection. X Only the files in the selected folder are displayed now. • If you have connected headphones to your VoiceTracer, the built-in speakers are disabled.
Format 6 Settings Select the format of your recording according to specific recording situations. Settings mode Mic sensitivity In the settings mode, you can change and adjust various settings according to your own preferences. Adjust the microphone sensitivity of your VoiceTracer. Select the sensitivity according to the background noise, number of recorded sound sources and distance between sound source and microphones.
Auto divide Backlight During recording, the auto divide feature will automatically split the current recording and save a new file every 15, 30 or 60 minutes. To save your VoiceTracer’s battery power, you can reduce the backlight time. If you don’t operate your device for the preset time, the backlight turns off automatically. Auto bookmark Date & time Use the Auto bookmark funktion to automatically set Off bookmarks at preset time intervals.
7 Device and data management Transfer data to the computer You can quickly and conveniently move files from your VoiceTracer to your computer. Link the device to a computer with a USB cable. Your recorder will automatically be recognized as a mass storage device. You don’t need to install any software.
4 Use the Up/Down buttons to navigate to Format storage and then press the Record button to confirm your selection. 5 Select Delete. X All data is deleted from the internal storage. Updating your device Your device is controlled by an internal program called firmware. As a part of ongoing product maintenance, the firmware is upgraded and errors are corrected. Reset settings You can reset your menu settings to their default state— the way they were when you first purchased your device and turned it on.
8 Troubleshooting Find the most common problems you could encounter with the VoiceTracer in the following table. If you are unable to solve the problem with the information below, contact the supporting Philips partner you purchased the device from. Problem Cause Solution The device doesn’t turn on. • The battery has run out of power. • Charge the device for a while and then turn it on again. I can’t record with the device. • You have reached the maximum file number or the device’s memory is full.
9 Technical data Power • Headphones: stereo jack, 3.5 mm, impedance 16 Ohm or more • USB: type C, high-speed 2.
Open source software Products mentioned in this manual may contain open source software. Speech Processing Solutions GmbH hereby offers to deliver, upon request, a copy of the complete corresponding source code for the copyrighted open source software packages used in this product for which such offer is requested by the respective licenses. This offer is valid up to three years after product purchase. To obtain the source code, please write in English to: info@speech.com.
Neither Speech Processing Solutions GmbH nor its affiliates shall be liable to the purchaser of this product or third parties with respect to claims for damages, losses, costs or expenses incurred by purchaser or third parties as a result of an accident,misuse or abuse of this product or unauthorized modifications, repair, modification of the product or failure to meet the operating and maintenance instructions provided by the manufacturer. This user manual is a document with no contractual nature.
Issue date 2019-10-07 Version 1.1 © 2019 Speech Processing Solutions GmbH. All rights reserved. Specifications are subject to change without notice. Philips and the Philips shield emblem are registered trademarks of Koninklijke Philips N.V. and are used by Speech Processing Solutions GmbH under license from Koninklijke Philips N.V. All trademarks are the property of their respective owners. www.philips.
