Operation Manual

14 Playback
Playback speed
Set your desired playback speed if you want to play
back your recording more slowly or faster.
1
In playback mode, press the Speed button on the
right side of your device.
2
Use the Volume up or Volume down button to set
your desired playback speed.
3
Press the Menu button to conrm your selection.
A-B replay mode
You can mark a sequence A-B in an existing recording to
replay only this marked section.
Mark an A-B sequence
1
In playback mode, press and hold the Menu button
until ‘A-B’ is displayed on the top of the screen.
X ‘A’ starts ickering.
2
Press the Fast forward button to mark the beginning
of the sequence (‘A’) to be replayed.
X ‘A’ stops ickering.
X ‘B’ starts ickering.
3
Press the Fast forward button again to mark the end
of the sequence (‘B’) to be replayed.
X ‘B’ stops ickering and the selected sequence is
replayed several times.
Stop A-B replay mode
If you want to stop the A-B replay mode, you can do one
of the following:
• Press the Menu button to stop the A-B replay mode
and continue with the normal playback.
• Press the Play/Pause button to pause the playback.
Press the Play/pause button again to continue with
the normal playback.
• Press the Stop button to stop playback.
Edit les
You can edit existing recordings in playback mode.
To switch between the editing options Append, Insert,
Divide, and Cut, press the Menu button to select your
desired editing option. The selected editing option is
displayed. It replaces the File details icon on the screen.
Note
• If you don’t operate your device for eight seconds
after selecting an editing option, the editing mode
is deactivated. Press the Menu button again to
reactivate the editing mode.
• In editing mode, you can’t pause playback because
the Play/Pause button is congured to conrm the
selection of an editing option.
Append: Add additional recording parts at the end of an
existing recording.
To append recording parts:
1
In playback mode, press the Menu button once to
select Append.
2
Press the Play/Pause button to conrm your
selection.
X A new recording starts at the end of your current
le.
Insert: Insert additional recording parts without
overwriting an existing recording.
To insert recording parts:
1
In playback mode, press the Menu button twice to
select Insert.
2
Press the Play/Pause button at the part of your
current recording where you want to insert an
additional recording part.
X A new recording starts at the selected part of the
existing recording.
Divide: Divide an existing recording into two les.
To divide a recording into two les:
1
In playback mode, press the Menu button three
times to select Divide.
2
Press the Play/Pause button at the part of your
current recording where you want your recording to
be split.
X The recording is divided into two les. Both les
are saved to the folder of the original recording.