User Manual
Table Of Contents
- Contents
- Machine overview (Fig. A)
- Control panel
- Introduction
- Before first use
- Brewing drinks
- Personalizing drinks
- Adjusting machine settings
- Removing and inserting the brew group
- Cleaning and maintenance
- AquaClean water filter
- Descaling procedure (30 min.)
- Ordering accessories
- Troubleshooting
- Technical specifications
- Contenido
- Descripción general de la máquina (Fig. A)
- Panel de control
- Introducción
- Antes del primer uso
- Preparación de bebidas
- Bebidas personalizadas
- Cambio de los ajustes de la máquina
- Retirada e inserción del grupo de preparación del café
- Limpieza y mantenimiento
- Filtro de agua AquaClean
- Procedimiento de eliminación de los depósitos de cal (30 minutos)
- Pedido de accesorios
- Solución de problemas
- Especificaciones técnicas
- Table des matières
- Vue d’ensemble de la machine (fig. A)
- Panneau de commande
- Introduction
- Avant la première utilisation
- Infusion de boissons
- Étapes générales
- Préparation d’un café à partir de grains
- Préparation des boissons à base de lait avec le LatteGo (récipient à lait)
- Production de mousse ou chauffage du lait avec le mousseur à lait classique
- Jet supplémentaire ExtraShot (certains modèles uniquement)
- Infuser du café avec du café prémoulu
- Distribution d’eau chaude
- Personnalisation des boissons
- Réglage des paramètres de la machine
- Retrait et insertion du groupe de percolation
- Nettoyage et entretien
- Filtre à eau AquaClean
- Procédure de détartrage (30 min.)
- Commande d'accessoires
- Résolution des problèmes
- Caractéristiques techniques
Frothing or heating up milk with classic milk frother
Always use milk coming directly from the fridge for the best foam quality.
1 Tilt the black silicone handle on the machine to the left and slide the milk frother onto it
(Fig. 13).
2 Fill a milk jug with with approx. 100 ml milk for cappuccino and approx. 150 ml milk for latte
macchiato.
3 Insert the milk frother approx. 1 cm into the milk.
4 Tap the steam icon (Fig. 14).
5 Turn the knob on the classic milk frother to the milk frothing icon (Fig. 15) if you want to
froth milk. Turn the knob on the classic milk frother to the flat milk icon (Fig. 16) if you want
heat up milk.
6 Make sure that the icon on the knob of the classic milk frother is aligned with the black
arrow.
7 Press the start/stop
button to start (Fig. 17).
-
The machine starts heating up, steam is forced into the milk and the milk is either
frothed or heated.
8 When the milk in the milk jug has reached the required foam volume or heat, press the
start/stop button again to stop frothing/heating milk.
Never steam milk longer than 90 seconds. The steaming automatically stops after 90
seconds.
In order to get the best milk froth quality, you do not have to move the milk jug during milk
frothing.
Extra shot (ExtraShot) (specific types only)
Your machine offers you the possibility to add an extra shot of Ristretto to your coffee and
milk drinks, for example if you want to have a stronger coffee.
1 Place a cup under the spout
2 Tap one of the one-touch drinks icons to select a drink or tap the 'More Drinks' icon
(specific types only) to select a drink.
3 Use the up arrow to set the strength to the top level and then select the ExtraShot function
(Fig. 18).
4 Tap the OK icon if you want to personalize the other settings. Then press the start/stop
icon to start brewing the drink.
5 To stop dispensing the drink before the machine has finished, press the start/stop
icon
again.
When you have selected the ExtraShot function, you can only brew one coffee at the time.
Brewing coffee with pre-ground coffee
You can choose to use pre-ground coffee instead of beans, for example if you prefer a
different coffee variety or decaffeinated coffee.
12
English