User Manual
Table Of Contents
- Contents
- Machine overview (Fig. A)
- Control panel
- Introduction
- Before first use
- Brewing drinks
- Personalizing drinks
- Adjusting machine settings
- Removing and inserting the brew group
- Cleaning and maintenance
- AquaClean water filter
- Descaling procedure (30 min.)
- Ordering accessories
- Troubleshooting
- Technical specifications
- Contenido
- Descripción general de la máquina (Fig. A)
- Panel de control
- Introducción
- Antes del primer uso
- Preparación de bebidas
- Bebidas personalizadas
- Cambio de los ajustes de la máquina
- Retirada e inserción del grupo de preparación del café
- Limpieza y mantenimiento
- Filtro de agua AquaClean
- Procedimiento de eliminación de los depósitos de cal (30 minutos)
- Pedido de accesorios
- Solución de problemas
- Especificaciones técnicas
- Table des matières
- Vue d’ensemble de la machine (fig. A)
- Panneau de commande
- Introduction
- Avant la première utilisation
- Infusion de boissons
- Étapes générales
- Préparation d’un café à partir de grains
- Préparation des boissons à base de lait avec le LatteGo (récipient à lait)
- Production de mousse ou chauffage du lait avec le mousseur à lait classique
- Jet supplémentaire ExtraShot (certains modèles uniquement)
- Infuser du café avec du café prémoulu
- Distribution d’eau chaude
- Personnalisation des boissons
- Réglage des paramètres de la machine
- Retrait et insertion du groupe de percolation
- Nettoyage et entretien
- Filtre à eau AquaClean
- Procédure de détartrage (30 min.)
- Commande d'accessoires
- Résolution des problèmes
- Caractéristiques techniques
1 Tap the profiles icon repeatedly to select one of the colored profiles. All profiles have a
different color.
2 Select a drink by tapping one of the one-touch drink icons or by tapping the 'More Drinks'
icon (specific types only).
3 Adjust the drink settings to your favorite taste.
4 Press start/stop
button to brew the drink you selected
-
Your new settings have now been stored in the colored profile you selected.
You can always restore the factory settings of the machine (see 'Restoring factory
settings').
Guest profile
Your machine is equipped with a guest profile. When the guest profile is selected, the profile
icon is off. When you select this profile, you can still personalize the settings to your own
preference but the recipes you brew will not be stored.
Adjusting machine settings
Setting the water hardness
We advise you to adjust the water hardness setting to the water hardness level in your
region for optimal performance and a longer lifetime of the machine. This also prevents you
from having to descale the machine too often. The default water hardness setting is 4: hard
water.
Use the water hardness test strip supplied in the box to determine the water hardness in
your region:
1 Immerse the water hardness test strip in tap water or hold it under the tap for 1 second (Fig.
23).
2 Wait 1 minute. The number of squares on the test strip that turn red indicates the water
hardness (Fig. 24).
Set the machine to the correct water hardness:
1 Tap the Settings
icon and use the up and down arrows to select 'Water hardness'. Then
press the OK icon to confirm.
2 Use the up and down icons to select the water hardness level. The number of red squares
selected on the display should be the same as the number of red squares on the test strip
(Fig. 25).
3 When you have set the correct water hardness, tap the OK icon to confirm.
Adjusting grinder settings
You can change the coffee strength with the grind setting knob inside the bean container. The
lower the grind setting, the finer the coffee beans are ground and the stronger the coffee.
There are 12 different grind settings you can choose from.
14
English