User manual

Problem Cause Solution
I cannot activate the
AquaClean water filter
and the machine asks
for descaling.
The filter has not been installed
or replaced in time after the
screen shows the AquaClean
reminder. This means your
machine is not anymore
completely limescale free.
Descale your machine first and then
install the AquaClean water filter.
The new water filter
does not fit.
You are trying to install another
filter than the Philips AquaClean
water filter.
Only the Philips AquaClean water filter
fits into the machine.
The rubber ring on the
AquaClean water filter is not in
place.
Place back the rubber ring on the
AquaClean water filter.
The machine is making a
loud noise.
It is normal that your machine
makes some noise during use.
If the machine starts to make a different
kind of noise, clean the brew group and
lubricate it (see 'Lubricating the brew
group').
The AquaClean water filter was
not prepared properly and air is
now drawn into the machine.
Remove the AquaClean water filter from
the water tank and properly prepare it
for use before you place it back. See
chapter 'AquaClean water filter' for
step-by-step instructions.
The water tank is not fully
inserted and air is drawn into
the machine.
Make sure the water tank is in the
correct position: remove it and insert it
again pushing it as far as possible.
Technical specifications
The manufacturer reserves the right to improve the technical specifications of the product. All the
preset quantities are approximate.
Description
Value
Size (w x h x d) 246 x 377 x 434 mm
Weight 7 - 7.5 kg
Power cord length 1200 mm
Water tank 1.8 litres
Coffee bean hopper capacity 275 g
Coffee grounds container capacity 12 pucks
LatteGo (milk container) capacity 250 ml
Adjustable spout height 88-145 mm
Nominal voltage - Power rating - Power supply See data label on inside of service door (Fig. A11)
26
English