Important Information Manual

If the internal cappuccinatore door is difficult to close, check if the

internal cappuccinatore is inserted correctly. Follow the

instructions in the user manual. Do not push the internal

cappuccinatore too far on the coffee/milk dispensing spout when

you insert it. In this case, the internal cappuccinatore would not

work correctly as it would not be able to suck up milk.

The metal part of the milk spout may become hot. To avoid the

danger of burns, always put the milk spout in the milk spout

holder before you start the cleaning program for the internal

cappuccinatore.

Do not clean the internal cappuccinatore in the dishwasher.

Machines with LatteGo

Warning

To avoid the danger of burns, be aware that dispensing may be

preceded by jets of milk and steam.

Wait until the end of the dispensing cycle before you remove

LatteGo.

Caution

Make sure that LatteGo is installed according to the instructions

provided in the user manual before you select a milk-based

coffee drink or milk froth.

Do not use LatteGo if not all components are correctly assembled

according to the instructions provided in the user manual or if

they are damaged.

Do not pour any other liquids in LatteGo other than water (for

cleaning as instructed in the manual) and milk.

Always remove LatteGo when you descale the machine and when

you dispense hot water.

Electromagnetic fields (EMF)

This machine complies with all applicable standards and regulations regarding exposure to

electromagnetic fields.

English