Operation Manual

2 Remove the filter from the filter holder by turning it
anticlockwise (fig. 13).
3 Remove the filter from the ring by gently turning it anticlockwise
(fig. 14).
4 Attach a new filter to the filter ring by turning it clockwise (fig.
16).
5 Push the tip of the filter inwards (fig. 17).
6 Fasten the filter in the filter holder by turning it clockwise. Put
the filter holder back into the dust compartment (fig. 18).
Accessories
New filters are available under type no. FC8035. Contact your Philips
dealer.
Environment
Saving energy
If you are not going to use the appliance for a longer period of time, we
advise you to remove the adapter from the wall socket to save energy.
Disposal of batteries
NiCd/NiMH batteries can be harmful to the environment and may
explode if exposed to high temperatures or fire.
◗ Remove the batteries when you discard the appliance. Do not
throw the batteries away with the normal household waste, but
hand them in at an official collection point (fig. 19).
You can also take the appliance to a Philips service centre, which will
remove the batteries for you and will dispose of them in an
environmentally safe way.
Only remove the batteries if they are completely empty.
Remove the batteries in the following way.
1 Let the appliance run until it stops, undo the screws and open the
vacuum cleaner (fig. 20).
ENGLISH10