Operation Manual

2 To disconnect the tube parts from each other and from the handgrip of the hose, pull while
turning a little.

1 To connect the tube to the handgrip of the hose, press the spring-loaded lock button on the
handgrip and insert the handgrip into the tube. Fit the spring-loaded lock button into the
opening in the tube (‘click’) (Fig. 4).
2 To disconnect the tube from the handgrip of the hose, press the spring-loaded lock button
and pull the handgrip out of the tube.
Note: Use the same method to connect and disconnect the nozzles.

1 Adjust the tube to the length you nd most comfortable during vacuum cleaning (Fig. 5).

The Tri-Active nozzle is a multi-purpose nozzle for carpets and hard oors.
- The side brushes catch more dust and dirt at the sides of the nozzle and allow you to clean
better along furniture and other obstacles (Fig. 6).
- The opening at the front of the nozzle allows you to suck up larger particles (Fig. 7).
1 To clean hard oors, push the rocker switch on top of the nozzle with your foot (Fig. 8).
, The brush strip for cleaning hard oors comes out of the housing. At the same time, the
wheel is lifted to prevent scratching and to increase manoeuvrability.
2 To clean carpets, push the rocker switch again (Fig. 9).
, The brush strip disappears into the nozzle housing and the wheel is lowered automatically.

The combination nozzle can be used on either carpets or hard oors.
1 To clean hard oors, push the rocker switch on top of the nozzle with your foot (Fig. 10).
, The brush strip for cleaning hard oors comes out of the nozzle housing.
2 To clean carpets, push the rocker switch again. (Fig. 11)
, The brush strip disappears into the nozzle housing.

1 Connect the crevice tool (1) or small nozzle (2) directly to the handgrip or to the tube
(Fig. 12).

1 Snap the accessory clip onto the tube (Fig. 13).
2 Snap the crevice tool and the small nozzle onto the clip.

1 Pull the cord out of the appliance and put the mains plug in the wall socket.
2 Press the on/off button on top of the appliance with your foot to switch on the appliance
(Fig. 14).
3 During vacuum cleaning, you can adjust the suction power with:
- the slide on the handgrip (specic types only) (Fig. 15).
- the knob on top of the appliance (specic types only) (Fig. 16).
 7