User manual
2 Attach the accessory to the nozzle of the appliance (Fig. 9).
Always remove the adapter from the wall socket before you clean the
charger.
1 Clean the appliance with a damp cloth.
Make sure you empty the dust compartment and clean the lters
regularly.
1 Hold the appliance over a dustbin and press the dust compartment
release button (Fig. 10).
2 Remove the lter unit from the dust compartment (Fig. 11).
3 Empty the dust compartment with your free hand.
4 Clean the outer lter and the inner lter.
Note: To clean the inner lter, remove the outer lter from the lter holder by
turning it anticlockwise.
Note: Clean the outer lter and the inner lter with a brush or with a normal
vacuum cleaner if they are very dirty.
Note: If necessary, clean the outer lter and the inner lter in cold or
lukewarm water.
5 Place the outer lter back onto the lter holder and put the lter
holder back into the dust compartment. Make sure you insert the
lter holder in the correct way (Fig. 12).
If you have cleaned the lter unit with water, make sure the lter unit is
completely dry before you reinsert it into the vacuum cleaner.
1 To store the brush tool and the crevice tool, place them on the
charger (Fig. 13).
9