Important Information Manual

- Perhaps the lter unit is not placed in the dust compartment properly. Place the lter unit
in the dust compartment properly.
5 The vacuum cleaner does not work properly when one of the attachments is attached
to the nozzle.
- Check if the attachment is blocked. If this is the case, remove the obstruction.
- The dust compartment may be full. Empty the dust compartment.
- The lter unit may be clogged. Clean both parts of the lter unit.
6 FC6142 only: The surface is still very wet after vacuuming liquid.
- Perhaps the squeegee is not attached to the nozzle. Attach the squeegee to the nozzle when
you want to vacuum up liquid.
- Perhaps you do not hold the appliance in the right way. Hold the appliance with the nozzle
pointing downwards at an angle of 30°. Do not tilt the appliance to one side and make sure the
squeegee touches the surface to be cleaned.
7 FC6142 only: Liquid leaks from the appliance.
- The lter unit may be wet. Make sure both parts of the lter unit are dry before you place
the lter unit in the dust compartment.
- You may not have put the lter unit in the dust compartment. Never use the appliance without
the lter unit.
- Perhaps the lter unit is not placed properly in the dust compartment. Place the lter unit
properly in the dust compartment.
- Perhaps the amount of liquid in the dust compartment exceeds the maximum indication.
Empty the dust compartment immediately and dry it. Never let the dust compartment ll up
with liquid beyond the maximum indication.
8 The appliance produces a lot of noise.
- There may be solid particles in the dust compartment. Empty the dust compartment.
ENGLISH6