Manual with important information
Table Of Contents
- Important safety information
- Ordering accessories
- Warranty and support
- Recycling
- Troubleshooting
- Təhlükəsizliklə bağlı vacib məlumat
- Aksesuarların sifarişi
- Zəmanət və dəstək
- Təkrar emal
- Nasazlıqların aradan qaldırılması
- Xavfsizlikka oid muhim axborot
- Aksessuarlarga buyurtma berish
- Kafolat va qoʻllab-quvvatlash
- Qayta ishlash
- Muammolarni bartaraf qilish
- Möhüm howpsuzlyk maglumaty
- Esbaplary sargyt etmek
- Kepillik we goldaw
- Gaýtadan işlemek
- Näsazlyklary çözmek
- Маанилүү коопсуздук маалыматы
- Шаймандарга буйрутма берүү
- Кепилдик жана колдоо
- Кайра иштетүү
- Мүчүлүштүктөрдү оңдоо
- Важные сведения о безопасности - дополнение к эксплуатационной документации
- Заказ аксессуаров
- Гарантия и поддержка
- Утилизация
- Поиск и устранение неисправностей
- Маълумоти муҳими бехатарӣ
- Фармоиши лавозимот
- Кафолат ва дастгирӣ
- Истифодаи партовҳо
- Ҷустуҷӯ ва ислоҳи нуқсонҳо
- Маңызды қауіпсіздік ақпараты - Қосымша пайдалану құжаттамасын
- Керек-жарақтарға тапсырыс беру
- Кепілдік және қолдау көрсету
- Өңдеу
- Ақаулықтарды жою
- Տեղեկություններ անվտանգության մասին
- Պահեստամասերի պատվիրում
- Երաշխիք և աջակցում
- Վերամշակում
- Անսարքությունների շտկում
- მნიშვნელოვანი ინფორმაცია უსაფრთხოების შესახებ
- აქსესუარების შეკვეთა
- გარანტია და მხარდაჭერა
- გადამუშავება
- დიაგნოსტიკა
8
English
Problem Possible cause Solution
You have not connected the correct
adapter and cord.
Make sure that you use the correct adapter and cord.
If you have checked the above and the appliance still does
not charge, take it to a Philips service center or contact the
Consumer Care Center via www.philips.com/support.
FC6726: The mini turbo brush does not
function properly.
The roller brush is blocked. Remove hairs from the brush with a pair of scissors (see
user manual).
The roller brush is blocked by fabric or
surfaces during cleaning.
Keep the mini turbo brush aligned with the surface and do
not push the turbo brush into soft surfaces.
The mini turbo brush is not fully closed. Make sure that the top and bottom parts of the mini turbo
brush are properly connected and there is no gap between
the two parts. Check if the locking ring is in closed position
(see user manual).
When I use my vacuum cleaner I
sometimes feel static electricity shocks.
Your vacuum cleaner builds up static
electricity. The lower the air humidity, the
more static electricity the appliance builds
up.
Discharge the appliance by frequently holding the tube
against other metal objects in the room (for example the
legs of a table or chair, etc.). You can also raise the air
humidity level in the room.
You vacuumed up fine sand, lime or a
similar substance. This also causes static
electricity.
Empty the dust container and clean the filter according to
the instructions in the user manual.
The bottom segment of the display
flashes red.
The battery is empty. Charge the battery by connecting the appliance to the
charging station. You can also charge the appliance directly
by inserting the adapter into the wall socket and attaching
the magnetic charging disc to the underside of the
appliance.
All segments of the display flash
quickly.
An error has occurred. Check for any blockages in the tube or nozzle. Try
recharging the appliance, emptying the dust container and
cleaning the filter. If this does not help, take the appliance
to a Philips service center or contact the Consumer Care
Center via www.philips.com/support.
The middle segment of the display
flashes white and the bottom segment
of the display flashes red.
The appliance is stored or charged at
temperatures below 5 °C.
Move the appliance to a warmer room. Do not store or
charge the appliance at temperatures below 5 °C or above
40 °C.