User manual
You can adjust the suction power with:
- the suction power slide on the handgrip.
- the electronic suction power control on the vacuum cleaner.
1 Switch off and unplug the appliance before you remove and clean any
parts.
2 Clean the appliance and its parts with a damp cloth.
Do not clean any part of the vacuum cleaner in the dishwasher.
To maintain optimal performance, clean the HEPA lter each time you
replace the dustbag.
1 To open the HEPA exhaust lter grille, grab the tabs and pull the
grille upwards to remove it from the appliance.
2 Remove the HEPA exhaust lter.
3 Rinse the pleated side of the HEPA exhaust lter under a hot slow-
running tap.
- Hold the lter in such a way that the pleated side points upwards and
the water ows parallel to the pleats. Hold the lter at an angle so that
the water washes away the dirt inside the pleats.
11