User manual

- Turn the lter 180° and let the water ow along the pleats in the

opposite direction.

- Continue this process until the lter is clean.

Never clean the HEPA exhaust lter with a brush.

Note: Cleaning does not restore the original colour of the lter, but does restore

its ltration power.

4 Carefully shake the water from the surface of the HEPA exhaust

lter. Let the HEPA exhaust lter dry completely before you put it

back into the vacuum cleaner.

5 Place the dry HEPA exhaust lter back into the appliance.

6 To close the HEPA exhaust lter grille, rst align the lugs on the top

of the grille with the slots in the appliance (1). Then press the tabs

downwards until the grille locks into place (2) (‘click’).



To maintain optimal performance, clean the motor protection lter at least

once a year.

1 Pull the cover upwards to open it.

2 Lift the dustbag holder out of the appliance.

Make sure you hold the dustbag upright when you lift it out of the

appliance.

12