User manual
Always unplug the appliance before you replace a lter.
Replace the HEPA exhaust lter every 12 months.
- To remove the old lter and place the new lter, follow the instructions
for removing and placing the lters in section ‘Cleaning the HEPA
exhaust lter’ in chapter ‘Cleaning and maintenance’.
- Philips Classic s-bag ® synthetic dustbags are available under type
number FC8021.
- Philips Clinic s-bag ® high ltration synthetic dustbags are available
under type number FC8022.
- Philips Anti-odour s-bag ® synthetic dustbags are available under type
number FC8023.
- Reusable dustbags (some countries only) are available under code
number 4322 004 93370.
Note: Please visit www.s-bag.com for more information about the s-bag.
- HEPA exhaust lters are available under type number FC8070.
1 Switch off and unplug the appliance.
2 Press the cord rewind button to rewind the cord.
3 Put the appliance in upright position. To attach the nozzle to the
appliance, insert the ridge on the nozzle into the storage slot.
Note: To ensure stable storage of the telescopic tube, adjust the tube to the
shortest length.
- Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an ofcial collection point for
recycling. By doing this, you help to preserve the environment.
If you need service or information or if you have a problem, please visit
the Philips website at www.philips.com or contact the Philips Consumer
Care Centre in your country (you nd its phone number in the worldwide
guarantee leaet). If there is no Consumer Care Centre in your country, go
to your local Philips dealer.
14