User manual
1 The suction power is insufcient
- Perhaps the dustbag is full.
If necessary, empty the dustbag.
- Perhaps the lters need to be cleaned or replaced.
If necessary, clean or replace the lters.
- Perhaps the suction power slide on the handgrip is open.
Close the slide.
- Perhaps the electronic suction power control is set to a low setting.
Set the control to a higher setting.
- Perhaps the nozzle, tube or hose is blocked up.
To remove the obstruction, disconnect the blocked-up item and connect it
(as far as possible) the other way round. Switch on the vacuum cleaner to
force the air through the blocked-up item in opposite direction.
15