User manual
2 Press the on/off button on top of the appliance with your foot to switch on the appliance.
- If you want to pause for a moment, insert the ridge on the nozzle into the parking slot to park
the tube in a convenient position (Fig. 10).
You can adjust the suction power with:
- the suction power slide on the handgrip or (Fig. 11)
- the electronic suction power control on the vacuum cleaner (specic types only) (Fig. 12).
Always unplug the appliance before you replace a lter.
Your vacuum cleaner is equipped with either a Micro Filter or a HEPA Filter.
Replace the Micro Filter every 6 months.
1 To remove the lter grille, turn it anticlockwise (1) and pull it out (2) (Fig. 13).
2 Remove the lter holder from the grille.
3 Remove the old lter from the lter grille.
4 Put the new lter on the grille and lock it into place with the lter support (Fig. 14).
5 Put the lter grille back into the appliance (1) and turn it clockwise (2) (Fig. 15).
Replace the HEPA Filter every 6 months.
1 To remove the lter grille, turn it anticlockwise (1) and pull it out (2) (Fig. 13).
2 Remove the HEPA Filter (Fig. 16).
3 Insert a new HEPA Filter.
4 Put the lter grille back into the appliance (1) and turn it clockwise (2) (Fig. 15).
Always switch off and unplug the appliance before you remove and clean any parts.
Do not clean any part of the vacuum cleaner in the dishwasher. If necessary, clean the parts with
a moist cloth.
1 Clean the appliance with a damp cloth.
For optimal performance, always empty the dust container after use and clean the lter cylinder
regularly.
1 Disconnect the hose from the appliance.
2 Open the cover (Fig. 17).
3 Remove the dust container from the appliance (Fig. 18).
4 Remove the lid of the dust container. (Fig. 19)
5 To remove the lter cylinder case, turn it anticlockwise and lift it out of the dust container.
(Fig. 20)
8