User manual

2 To disconnect the tube parts from each other and from the handgrip of the hose, pull while
turning a little.
Button coupling (specic types only)
1 To connect the tube to the handgrip of the hose, press the spring-loaded lock button on the
handgrip and insert the handgrip into the tube. Fit the spring-loaded lock button into the
opening in the tube (‘click’) (Fig. 4).
2 To disconnect the tube from the handgrip of the hose, press the spring-loaded lock button
and pull the handgrip out of the tube.
Note: Use the same method to connect and disconnect the nozzles.
Telescopic tube (specic types only)
1 Adjustthetubetothelengthyoundmostcomfortableduringvacuumcleaning(Fig.5).
Tri-Active nozzle (specic types only)
The Tri-Active nozzle is a multi-purpose nozzle for carpets and hard oors.
The side brushes catch more dust and dirt at the sides of the nozzle and allow you to clean
better along furniture and other obstacles (Fig. 6).
The opening at the front of the nozzle allows you to suck up larger particles (Fig. 7).
1 Tocleanhardoors,pushtherockerswitchontopofthenozzlewithyourfoot(Fig.8).
Thebrushstripforcleaninghardoorscomesoutofthehousing.Atthesametime,the
wheelisliftedtopreventscratchingandtoincreasemanoeuvrability.
2 To clean carpets, push the rocker switch again (Fig. 9).
Thebrushstripdisappearsintothenozzlehousingandthewheelisloweredautomatically.
Combination nozzle (specic types only)
The combination nozzle can be used on either carpets or hard oors.
1 Tocleanhardoors,pushtherockerswitchontopofthenozzlewithyourfoot(Fig.10).
Thebrushstripforcleaninghardoorscomesoutofthenozzlehousing.
2 To clean carpets, push the rocker switch again (Fig. 11).
Thebrushstripdisappearsintothenozzlehousing.
Crevice tool and small nozzle
1 Connectthecrevicetool(1)orsmallnozzle(2)directlytothehandgriportothetube
(Fig. 12).
Accessory clip
1 Snap the accessory clip onto the tube (Fig. 13).
2 Snapthecrevicetoolandthesmallnozzleontotheclip.
Using the appliance
1
Pull the cord out of the appliance and put the mains plug in the wall socket.
2 Press the on/off button on top of the appliance with your foot to switch on the appliance
(Fig. 14).
3 Duringvacuumcleaning,youcanadjustthesuctionpowerwith:
the slide on the handgrip (specic types only) (Fig. 15)
the knob on top of the appliance (specic types only) (Fig. 16)
-
-
,
,
,
,
-
-
ENGLISH 7
4222.003.3112.4 7 14-11-2007 12:48:40