operation manual

In this mode, the robot follows the walls of the room to give the area
alongside the walls an extra clean.
In this mode, the robot moves in a spiral pattern to clean a small dirty area
thoroughly. In spiral mode, the fan operates at turbo speed (FC8820 only).
Manual driving
1 Use the arrow buttons above and below and to the left and right of the
start/stop button on the remote control to navigate the robot through the
room.
Note: Be careful when you drive the robot manually close to height
differences and staircases.
Note: The vacuuming function and the side brushes only work when the
robot is driven forward. The left, right or back buttons are only for
maneuvering the robot.
Using the cleaning time button
-
Press the maximum cleaning time button to make the robot clean in auto
cleaning mode until its rechargeable battery runs low.
When the robot has finished cleaning, it returns to the docking station
automatically if it started from the docking station. If the robot started
from another point in the room, press the docking button to send it back
to the docking station.
15
English
Spiral mode
Wall-following mode