User manual

16
1 Open the exhaust grille (1) and pull it out of the appliance (2).
2 Pull the top of the HEPA-lter lock grille towards you and put it in
upright position.
3 Take out the washable HEPA 13 lter.
4 Rinse the pleated side of the HEPA 13 lter under a hot slow-
running tap.
- Hold the lter in such a way that the pleated side points upwards and
the water ows parallel to the pleats. Hold the lter at an angle so that
the water washes away the dirt inside the pleats.
- Turn the lter 180° and let the water ow along the pleats in opposite
direction.
- Continue this process until the lter is clean.
16