User manual

9
2 Adjust the telescopic tube to the length you nd most comfortable
during vacuuming.
Hold the collar with one hand and pull the tube part above the collar
upwards or push it downwards with the other hand.
3 To connect the tube to a nozzle, press the spring-loaded lock button
on the tube and insert the tube into the nozzle. Fit the spring-loaded
lock button into the opening in the nozzle (‘click’).

1 Snap the crevice tool and the small nozzle into the clip.
2 Snap the accessory clip onto the tube.
3 Pull the accessory clip from the tube to remove it.

1 Snap the accessory holder onto the handgrip.
2 Store accessories in the accessory holder by pushing them into the
holder. To detach the accessories, pull them out of the holder.
You can store two accessories at a time in the accessory holder.
 9