operation manual

- Hold the lter in such a way that the pleated side points upwards and
the water ows parallel to the pleats. Hold the lter at an angle so that
the water washes away the dirt inside the pleats.
- Turn the lter 180° and let the water ow along the pleats in opposite
direction.
- Continue this process until the lter is clean.
Never clean the washable lter with a brush.
Note: Cleaning does not restore the original colour of the lter, but does restore
its ltration power.
5 Carefully shake the water from the surface of the lter. Let the lter
dry completely for at least 2 hours before you put it back into the
vacuum cleaner.
6 Put the dry lter back into the appliance.
7 Fit the two lugs of the lter cover behind the ridge at the bottom
of the vacuum cleaner (1). Then push the lter cover towards the
appliance (2).
 15