operation manual

2 Remove any sticker, protective foil or plastic from the appliance.


1 To connect the telescopic tube to the handgrip, press the spring-
loaded lock button on the handgrip (1) and insert the handgrip into
the tube (2). Fit the spring-loaded lock button into the opening in the
tube (‘click’).
2 To disconnect the tube from the handgrip, press the spring-loaded
lock button and pull the handgrip out of the tube.

1 To connect the nozzle or an accessory to the tube, press the spring-
loaded lock button (1) on the tube and insert the tube into the oor
nozzle (2). Fit the spring-loaded lock button into the opening in the
nozzle (‘click’).
Note: You can also connect the nozzle or accessories directly to the handgrip in
the same way.
2 To disconnect the nozzle or an accessory from the tube, press the
spring-loaded lock button and pull the nozzle out of the tube.

1 To connect the hose, push it rmly into the appliance (‘click’).
Note: Make sure that the projection of the hose ts into the recesses.
2 To disconnect the hose, push the buttons (1) and pull the hose out
of the appliance (2).
8