Mobile Phone Owner's Manual

17
Main features
3 When the option Add voice tag? appears, press , , then follow the
instructions displayed on the screen. When prompted to record your
voice tag, make sure you are in a quiet environment, choose a short and
simple word and clearly pronounce it.
4From the Voi c e d i a l menu, press
C to go back to idle.
5Press
, when in idle mode, then say the voice tag corresponding to
the number you want to dial.
6 To display the list of voice dials you have defined, select Settings, Vo i ce
Commands, Vo i ce d i al and press
, . You can also set a voice tag for a
voice dial from this menu, by selecting the <New> item, pressing
,
and following the instructions appearing on the screen.
Voice tags you set for Voice dial can be played, changed or deleted at any time.
You can also set a voice tag for a voice command (e.g. launch calculator or add
organiser event, see page 34).
L The duration of a voice tag is 2 seconds. Up to 40 voice tags can be defined and
shared between voice dial and voice command.
Clear the call list
To clear your call list, press C and select Call list, then Reset. Press ,
to reset the call list.
Clear the SMS list
As explained further in this guide, short messages (SMS) sent or received can
also be saved (see “Read an SMS” page 49). To clear the whole list at once,
press
C and select Messages, then press , to select Reset. Press ,
to reset the SMS list.
L Deleting your SMS list is useful to free memory space to receive new messages.
Clear the phonebook
To clear the content of your phonebook at once, press C and select
Phonebook, Phonebook settings, Reset Phonebook. Press
, to reset the
phonebook content.
L This option only applies to the phonebook in your phone, not to the SIM
phonebook (see “Phonebooks” page 40).
Reset
Reset
Reset Phonebook
Fisio825_GB_4311 255 53812.book Page 17 Vendredi, 18. octobre 2002 9:45 09