231TE4L www.philips.
www.philips.com/support Model Serial Country Telephone number Argentina 0800 3330 856 Brazil 0800-7254101 Register your product and get support at www.philips.com/welcome This information is correct at the time of press. For updated information, see www.philips.com/support.
1 Notice 2 2 Important 3 3 Get started and connect your devices 5 The most updated user manual on line Back connector Side connector 4 5 6 4 Controls 7 5 Start to use 9 Side control buttons Remote control 7 7 Switch your monitor on/off or to standby 9 Switch channels 9 Watch connected devices 10 Adjust monitor volume 10 6 Product information 11 7 TV/Channel installation 12 Supported display resolutions Tuner/Reception/Transmission Remote control Power Supported monitor mounts Using TV
1 Notice 2011 © Koninklijke Philips Electronics N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips Electronics N.V. and are used under licence from Koninklijke Philips Electronics N.V. Specifications are subject to change without notice. Warranty • Risk of injury, damage to monitor or void of warranty! Never attempt to repair the monitor yourself. • Use the monitor and accessories only as intended by the manufacturer.
• Read and understand all instructions before you use your monitor. If damage is caused by failure to follow instructions, the warranty does not apply. Safety • Risk of electric shock or fire! • Never expose the monitor to rain or water. Never place liquid containers, such as vases, near the monitor. If liquids are spilt on or into the monitor, disconnect the monitor from the power outlet immediately. Contact Philips Consumer Care to have the monitor checked before use.
• • • • • • Risk of injury, fire or power cord damage! Never place the monitor or any objects on the power cord. To easily disconnect the monitor power cord from the power outlet, ensure that you have full access to the power cord at all times. When you disconnect the power cord, always pull the plug, never the cable. Disconnect the monitor from the power outlet and aerial before lightning storms. During lightning storms, never touch any part of the monitor, power cord or aerial cable.
a AV INPUT Audio and video input from an AV device. AUDIO OUT Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. This section describes how to connect various devices with different connectors and supplements examples provided in the Quick Start Guide.
d HDMI Digital audio and video input from highdefinition digital devices such as Blu-ray players. Side connector 1 e SPDIF OUT Digital audio output to home theaters and other digital audio systems. 2 3 f TV ANTENNA Signal input from an antenna, cable or satellite. a HDMI Digital audio and video input from highdefinition digital devices such as Blu-ray players. b USB For music and photo. c HEADPHONE Audio output to your headphones.
4 Controls English Remote control 1 Side control buttons 20 18 5 21 3 19 5 17 7 2 4 6 8 4 9 3 16 10 15 11 2 1 6 a b 12 POWER: Switch the monitor on or off. The monitor is not powered off completely unless it is physically unplugged. 13 14 SOURCE: Select an input source. Return to the previous screen or exit from the on-screen menu. c MENU/OK: Display the on-screen menu. Confirm a selection. d CH +/-: Switch to the next or previous channel.
c INFO Display or hide the information screen about the selected channel. d GUIDE Switch the Electronic Program Guide On or Off. r s • • (Red button) Set the favorite channel. Set the default setting for some options. (Green button) Set the skip channels in channel menu. e (Yellow button) Set the block channels in channel menu. t CC Switch the closed caption mode. f (Blue button) Delete the channel in channel menu. u AUDIO Switch stereo mode. g OPTION Press to display a list of options.
Tip •• Though your monitor consumes very little power when in standby, energy continues to be consumed. When not in use for an extended period of time, disconnect the monitor power cable from the power outlet. This section helps you perform basic monitor operations. Switch your monitor on/off or to standby English 5 Start to use Note •• If you cannot locate your remote control and want to switch on the monitor from standby, press POWER at the side of the monitor.
Watch connected devices Adjust monitor volume Note •• Switch on the connected device before selecting it as a source on the monitor. To select from the SOURCE button TV AV HDMI1 HDMI2 Component PC 1. Press SOURCE to display the source list. »» The source list appears. 2. Press SOURCE, ▲ or ▼ to select a device. 3. Press OK to confirm your selection. 10 EN To turn up or down the volume • • Press VOL +/- on the remote control.
Remote control Product information is subject to change without notice. For detailed product information, go to www.philips.com/support.
7 TV/Channel installation Add Channels Add Channels Picture This chapter describes the channel installation settings. TV Signal Source Air Signal Meter Sound I Installation Services Navigation Off Enable One-Seg Off Channel Edit Remove All Channel Using TV signal as the input source Settings 1. Press MENU to display the main setup menu. HDMI1 HDMI2 PC Component AV Multi-Media Setting Exit 1. Press MENU to display the main setup menu. 2. Press ▲, ▼, ◄, or ► to select TV. 3.
Signal Meter English TV Signal Source Add Channels Picture TV Signal Source Add Channels Air Picture Signal Meter Sound I Installation TV Signal Source Air Signal Meter Services Navigation Off Enable One-Seg Off Channel Edit Sound I Installation Remove All Channel Settings Services Navigation Off Enable One-Seg Off Channel Edit Remove All Channel Settings 1. Press MENU to display the main setup menu. 1. Press MENU to display the main setup menu. 2.
Services Navigation Enable One-Seg This item sets the service navigation option on or off. When it is enabled, the channels in the service channel list can be swapped by pressing the CH+/CH- button. When this function is enabled, the One-Seg channels would be listed in the service channel list.
Remove All Channels English Channel Edit Add Channels Picture TV Signal Source Add Channels Air Picture Signal Meter Sound I Installation TV Signal Source Air Signal Meter Services Navigation Off Enable One-Seg Off Channel Edit Sound I Installation Remove All Channel Settings Services Navigation Off Enable One-Seg Off Channel Edit Remove All Channel Settings 1. Press MENU to display the main setup menu. 1. Press MENU to display the main setup menu. 2.
8 Settings Exhibition Time This item sets the menu display time. This chapter describes how to change settings and customize functions. Picture Language English Exhibition Time 15 Sec Parental Lock Sound Language Sleep I Installation Language English Exhibition Time 15 Sec Parental Lock Sound Date and Time Sleep I Installation Blue Screen Auto Power-Off S Settings E-Sticker CC On Mute Color System Off On 1 Hour Off On Auto 1. Press MENU to display the main setup menu. 2.
Date and Time This item lock the channels to prevent children from watching. This item set the clock.
Sleep Blue Screen This item switches the monitor to standby after a defined period of time with no control command. This item switches the blue screen on or off when the signal is not receiving. Picture Language Picture Exhibition Time English 15 Sec Parental Lock Sound I Installation S Settings Off Blue Screen On 1 Hour E-Sticker Off CC On Mute On 2. Press ▲, ▼, ◄, or ► to select Setting and press OK to enter. 3. Press ▲ or ▼ to select Settings and press ► or OK to enter. 4.
E-Sticker This item switches the monitor off after a period of time with no signal receiving. This item set the TV to Demo mode. When any other OSD on screen. e-Sticker would not come out.
CC On Mute Color System This item switches the Closed Caption on or off. This item set the color system.
English PC This item adjust the settings when PC is connected. Picture Language English Exhibition Time 15 Sec Parental Lock Sound Date and Time Sleep I Installation Blue Screen Auto Power-Off S Settings E-Sticker CC On Mute Color System Off On 1 Hour Off On Auto PC 1. Press MENU to display the main setup menu. 2. Press ▲, ▼, ◄, or ► to select Setting and press OK to enter. 3. Press ▲ or ▼ to select Settings and press ► or OK to enter. 4. Press ▲ or ▼ to select PC and press ► or OK to enter.
9 Multimedia Music Player This chapter describes how to use the multimedia function. Photos TV HDMI1 HDMI2 PC Component AV Setting Exit Select 1. Press MENU to display the main setup menu. 2. Press ▲, ▼, ◄, or ► to select MultiMedia and press OK button to enter. 3. Select a USB device from the list and press OK to enter. View Photos Photos Select Music OK Enter Back 1. Press ◄ or ► to select Photos and press OK button to enter. 2. Press ▲, ▼, ◄, or ► to select a folder or file. 3.
Philips strives to deliver the highest quality products. We use some of the industry's most advanced manufacturing processes and practice stringent quality control. However, pixel or sub pixel defects on a flat monitor panel are sometimes unavoidable. No manufacturer can guarantee that all panels will be free from pixel defects, but Philips guarantees that any monitor with an unacceptable number of defects will be repaired or replaced under warranty.
Note •• A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots. Black Dot Defects: black dot defects appear as pixels or sub pixels that are always dark or 'off'. That is, a dark dot is a sub-pixel that stands out on the screen when the monitor displays a light pattern.
ACCEPTABLE LEVEL 221TE4L / 231TE4L 3 1 0 >15mm 3 BLACK DOT DEFECTS MODEL 1 dark subpixel 2 adjacent dark subpixels 3 adjacent dark subpixels Distance between two black dot defects* Total black dot defects of all types ACCEPTABLE LEVEL 221TE4L / 231TE4L 5 or fewer 2 or fewer 0 >15mm 5 or fewer TOTAL DOT DEFECTS MODEL Total bright or black dot defects of all types ACCEPTABLE LEVEL 221TE4L / 231TE4L 5 or fewer English BRIGHT DOT DEFECTS MODEL 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixe
11 Troubleshooting This section describes commonly encountered issues and suggested solutions. General monitor issues The monitor does not switch on: •• Disconnect the power cable from the power outlet. Wait for one minute then reconnect it. •• Check that the power cable is securely connected. The remote control is not working properly: •• Check that the remote control batteries are correctly inserted according to the +/- orientation. •• Replace the remote control batteries if they are flat or weak.
Computer connection issues There is a picture but no sound from the monitor: •• If no audio signal is detected, the monitor The computer display on the monitor is not stable: •• Check that a supported resolution and refresh rate is selected on the computer. •• Set the monitor picture format to unscaled. •• Contact us Note automatically switches the audio output off — this does not indicate malfunction. Check that all cables are properly connected. •• Check that the volume is not set to 0.
Version: M4221TEE1BZT 2011 © Koninklijke Philips Electronics N.V. All rights reserved. Specifications are subject to change without notice. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips Electronics N.V. and are used under license from Koninklijke Philips Electronics N.V.” www.philips.