Register your product and get support at www.philips.
EN Addendum You cannot play mp4 video files that use the H.264 or AVC codec. VI FR Addenda La lecture de fichiers vidéo MP4 utilisant le codec H.264 ou AVC n’est pas prise en charge. ZH-CN 附录 您无法播放使用 H.264 或 AVC 编解码器的 MP4 视频文 件。 TH ภาคผนวก คุณไม่สามารถเล่นไฟล์วิดีโอ MP4 ที่ เข้ารหัสแบบ H.264 หรือ AVC ได้ ZH-HK 附錄 您無法播放使用 H.264 或 AVC 編碼的 MP4 影像檔。 Phụ lục Bạn không thể phát các tập tin video MP4 sử dụng bộ giải mã AVC hoặc H.264.
1 Notice 2 2 Important 3 3 Your TV 5 5 5 Side controls and indicators Remote control 4 Use your TV Adjust TV volume Use teletext 9 9 5 Use more of your TV 10 Access TV menus 10 Change picture and sound settings 10 Use advanced teletext features 13 Create and use lists of favourite channels 14 Use timers 15 Use child control 15 Use the TV clock 16 View photos, play music and watch video from a USB storage device 16 Use
1 Notice 2010 Koninklijke Philips Electronics N.V. All rights reserved. - # notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system.
Read and understand all instructions before you use your TV. If damage is caused by failure to follow instructions, the warranty does not apply. Safety = Never expose the TV to rain or water. Never place liquid containers, such as vases, near the TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use.
= Never place the TV or any objects on the power cord. = To easily disconnect the TV power cord from the power outlet, ensure that you have full access to the power cord at all times. = When you disconnect the power cord, always pull the plug, never the cable. = Disconnect the TV from the power outlet and antenna before lightning storms. During lightning storms, never touch any part of the TV, power cord or antenna cable.
Remote control Eng lish 3 Your TV Congratulations on your purchase, and " Z " support that Philips offers, register your TV at www.philips.com/welcome. 1 2 3 4 5 6 7 29 28 27 This section gives you an overview of commonly used TV controls and functions. 26 25 8 Side controls and indicators 9 10 1 24 2 3 23 5 11 12 13 14 15 16 17 18 4 19 a b +/-: Increases or decreases volume. : Selects connected devices.
a = = b c (Standby-On) Switches the TV to standby if it is on. Switches on the TV if it is in standby. TELETEXT Toggles teletext on or off. d Colour buttons Select tasks, options or teletext pages. Available in selected models only. e SLEEP Sets a delay after which the TV switches to standby. f DUAL Switches Stereo and Nicam Stereo to & ! # # [% '\ or second language (Dual II) in bilingual programmes. g (Home) Toggles the home menu on or off.
Remote control usage Eng lish When using the remote control, hold it close to the TV and point it at the remote control sensor. Make sure that the line-of-sight between the remote control and TV is not blocked by furniture, walls or other objects.
4 Use your TV Switch channels This section helps you perform basic TV operations (see ‘Use more of your TV’ on page 10). Switch your TV on/off or to standby = = = = To switch on = If the standby indicator is off, press Power switch at the bottom of the TV. = If the standby indicator is red, press (Standby-On) on the remote control. To switch to standby = Press (Standby-On) on the remote control. » The standby indicator switches to red.
Use teletext 1 Press TELETEXT. » The main index page appears. 2 Select a page as follows: = Press the Numeric buttons to enter a page number. to view the = Press CH +/- or next or previous page. = Press the Colour buttons to select a colour coded item. = Pressing BACK to return to the previously viewed page. 3 Press Note = You can add new devices to the home menu for easy access. 1 Press (Home). » The home menu appears. 2 3 Press to select the device.
4 5 Use more of your TV = After selecting [Add new device], follow the on-screen instructions to select the correct device and connector. Menus help you to install channels, change picture and sound settings and access other features. Access the home menu The home menu gives you easy access to connected devices, picture and sound settings, and other useful features. Press (Home). » The menu screen appears. Add new device (Home) to exit.
| " picture settings. 1 + Press PICTURE. » The [Smart picture] menu appears. 2 Press to select one of the following smart picture settings. = [Personal] : Lists customised picture settings. = [Vivid] : Applies rich and dynamic settings. = [Standard] : Adjusts picture settings to suit most environments and types of video. = [Movie] : Applies settings for movie viewing. = [Game] : Applies settings for games. = [Energy saving] : Applies low-energy settings.
Change picture format 1 Press FORMAT. » A picture format bar appears. 2 Press to select a picture format. » The selected picture format is activated. 3 Press OK " ! [Super zoom] : (Not for HD and PC mode.) Removes the black bars on the side of 4:3 broadcasts. There is minimal distortion. [4:3] : Shows the classic 4:3 format. [Movie expand 16:9] : (Not for HD and PC mode.) Scales 4:3 format to 16:9. [Wide screen] : Scales 4:3 format to 16:9.
= = 3 [News] : Applies settings for spoken audio, such as news. [Movie] : Applies settings for movies. [Personal] : Applies the settings that were customised in the sound menu. Press OK " ! » The selected smart sound setting is applied. Use advanced teletext features Eng lish = Access the teletext options menu Access the teletext features through the teletext options menu. 1 Press TELETEXT. » The teletext screen appears. Manually adjust sound settings 2 1 2 Press OPTIONS.
Select T.O.P. teletext broadcasts Table Of Pages (T.O.P.) teletext broadcasts allow you to jump from one subject to another without using page numbers. T.O.P. teletext is not broadcast on all TV channels. Add a channel to the favourite list Tip = View all channels before adding a channel to the favourite list. 1 Press TELETEXT. » The teletext screen appears. 1 2 When watching TV, switch to the channel you want to add to a favourite list. Press INFO. » The T.O.P. overview appears.
You can set timers to switch the TV to standby " ! 8 9 Press OK "! Press BACK to exit. Eng lish Use timers Tip = Select [On timer] > [Activate] > [Off] to Automatically switch the TV to standby (sleep timer) Sleep timer switches the TV to standby after a + " ! disable [On timer]. = When [On timer] is [Off], only [Activate] can be selected. = Set the TV clock before activating [On timer]feature.
4 5 Press to select [Lock] or [Unlock]. Press OK. » All channels and connected devices are locked or unlocked. Note Display the TV clock 1 When watching TV, press OPTIONS. » The TV options menu appears. 2 3 Select [Clock]. Press OK. » The clock is displayed. = If you select [Lock], you have to enter your code every time you turn on your TV. Note = X Lock or unlock one or more channels 1 When watching TV, press OK to display the channel grid. 2 Press or unlock.
View a slide show of your photos 1 2 Turn on the TV. 1 3 Press (Home). » The home menu appears. When a full screen image of a photo is displayed, press OK or . » A slide show begins from the selected image. 2 Press: = OK or to pause the slide show. » The icon appears. 4 5 Connect the USB storage device to the TV. Press to select [Browse USB]. Press OK "! » The USB content browser appears. = = Tip Press or to move between images. Press BACK or to stop the slide show.
4 5 Press or to select a song. Press OK or to play the song. = Press OK or to pause, press OK or again to resume. = Press to search-forward. = Press to search-backward. = Press to stop playback. View a slideshow with music Use Scenea to display a picture as TV wallpaper You can use Scenea to display a picture as wallpaper on your TV. Make sure that the location of your TV is set to home (see ‘Change TV preferences’ on page 19). Activate Scenea You can view a picture slide show with background music.
3 4 5 6 Press (Home). » The home menu appears. Press to select [Browse USB]. Press to navigate to the picture of your choice. Press SCENEA. » Your picture is stored as the default Scenea picture in your TV. Disconnect the USB storage device. Adjust wallpaper settings 1 2 3 Press 3 4 (Home). Select [Setup] > [Features] > [Scenea]. Press to select from the following settings: = [Activate] : Enters the Scenea mode. = [ECO] : Applies low-energy settings.
Start a TV demo You can use demonstrations to better understand the features of your TV. Some demos are not available on certain models. Available demos are displayed in the menu list. 1 2 3 Press DEMO on the remote control. Press to select a demo and press OK to view it. Press DEMO to exit. Reset the TV to factory settings You can restore the default picture and sound settings of your TV. The channel installation settings remain the same. 1 2 Press 3 Press OK or to enter the [Factory settings] menu.
Step 2 Search and store new TV channels Automatically install channels 1 2 This section describes how to search and store channels automatically. 1 2 Press Eng lish 6 Install channels (Home). Press to select [Setup] > [Installation] > [Channel install.] > [Analogue: Manual]. » The [Analogue: Manual] menu appears. 3 Press [Search]. 4 Press Numeric buttons to manually enter the three-digit frequency. 5 Press OK to begin search.
Tip = Rename channels - a channel name can be up to six characters long. = Press [Aa] to change an uppercase letter to a lowercase letter and vice versa. Reorder channels After you install channels, you can rearrange the order in which they appear. 1 When watching TV, press BROWSE repeatedly until the channel grid is displayed. 2 Press OPTIONS. » The channel options menu appears. 3 Press [Reorder]. 4 Select the channel you want to reorder and press OK.
Bottom connectors Eng lish 7 Connect devices This section describes how to connect various devices with different connectors and supplements examples provided in the Quick Start. Note = Different types of connectors may be used to connect a device to your TV, depending on availability and your needs. A comprehensive interactive guide to help you connect your product is available at www.connectivityguide. philips.com.
Connect a computer = = = AUDIO IN DVI/VGA Before you connect a computer to the TV, set the monitor refresh rate on your computer to 60Hz. Connect your computer to the TV. FORMAT and change the TV Press picture format to [Unscaled]. DVI Connect a computer with one of the following connectors: = Note VGA cable = Connections via DVI or VGA require an additional audio cable.
If there is video and audio output, press OK. Repeat the procedure until all devices are correctly assigned to connectors. Use Philips EasyLink Your TV supports Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol. EasyLink-compliant devices that are connected through HDMI connectors can be controlled by a single remote control. Note = Philips does not guarantee 100% interoperability with all HDMI CEC devices.
Use a Kensington lock Tip = Press TV to switch back to the aerial source from EasyLink mode. Enable or disable EasyLink Note = Do not enable Philips EasyLink if you do not intend to use it. 1 2 Press 3 Select [ON] or [OFF]. (Home). Select [Installation] > [Preferences] > [EasyLink]. Enable or disable remote control key forwarding 1 2 3 4 5 Press OPTIONS. Select [En./Dis. RC pass.]. Press OK. Press or connector.
Product information is subject to change without notice. For detailed product information, go to www.philips.com/support.
TV screen size Wall bracket type Screw size 32” - 40” 200 x 200 mm 46” - 52” 300 x 300 mm M6 & % # without notice. - # 32PFL5605 = Without TV stand = Dimension (WxHxD): 790 x 501 x 92 (mm) = Weight: 10 kg = With TV stand = Dimension (WxHxD): 790 x 542 x 221 (mm) = Weight: 11.5 kg 40PFL5605 = Without TV stand = Dimension (WxHxD): 977 x 605 x [""\ = Weight: 13.7 kg = With TV stand = Dimension (WxHxD): 977 x 649x 236 (mm) = Weight: 16.
This section describes commonly encountered issues and accompanying solutions. General TV issues The TV does not switch on: Disconnect the power cable from the power outlet. Wait for one minute then reconnect it. Check that the power cable is securely connected. The remote control is not working properly: Check that the remote control batteries are correctly inserted according to the +/- orientation.
Sound issues Computer connection issues There is a picture but sound quality is poor: The computer display on the TV is not stable: Check that your PC uses the supported resolution and refresh rate. Set the TV picture format to unscaled. Note = If no audio signal is detected, the TV automatically switches the audio output off — this does not indicate malfunction. Check that all cables are properly connected. Check that the volume is not set to 0. Check that the sound is not muted.
A antenna 23 B back connectors batteries bracket for wall mount 23 27, 4, 29 27 demo devices devices add to home menu remove digital services teletext disconnect USB display resolution dispose 20 23 10, 24 10 9, 13 17 27 4 C care channels install automatic manual lock rename reorder/rearrange troubleshooting tune child lock lock channels lock connected devices PIN code computer connect display resolution connect antenna PC power cord connectors back connectors HDMI overview s
home or shop lock Kensington lock lock channels lock connected devices PIN code 19 26 16 15 29, 15 M menu language main menu teletext troubleshooting MHEG teletext MPEG artifact reduction multimedia music USB mute TV speakers 29 10, 10 13 29 9 11 27 17 26 O on timer 15, 15 P PC connect resolution picture format change troubleshooting picture settings PIN code pixel plus link power preferences 30 27 12 29 10 29, 15 19 27, 29, 5 19 27 27, 4 5 26 29 21 22 27 20 S
Contact information België/ Belgique 0800 80 190 Gratis / Gratuit ß CHAT www.philips.com/support #$%&'*;< 00800 11 544 24 = > ? 800142840 Bezplatný hovor @ 3525 8759 Lokalt opkald ß CHAT www.philips.com/support @ 0800 000 7520 gebührenfreier Anruf ß CHAT www.philips.com/support JQQZ\^ 0 0800 3122 1280 _ ` 900 800 655 Teléfono local gratuito solamente para clientes en España ß CHAT www.philips.
© 2010 Koninklijke Philips Electronics N.V. All rights reserved.
