User Manual

16
English
3139 115 20612
Display mode
There are four different display modes for
selection.
● Press DISPLAY repeatedly to select NORMAL,
MODE 1, MODE 2, or MODE 3.
NORMAL ........ All available LEDs will light up
and the display screen will have
full brightness. The VU meter will
be in music mode.
MODE 1 ..........All available LEDs will light up
and the display screen will have
full brightness. The VU meter will
be in volume mode.
MODE 2 ..........All available LEDs will light up
and the display screen will be at
half brightness. The VU meter
will be in music mode.
MODE 3 ..........The display screen will be at half
brightness. The VU meter and all
LEDs will be off.
Volume Control
Adjust VOLUME to increase (turn knob
clockwise or press VOLUME +) or decrease
(turn knob anti-clockwise or press VOLUME -)
the sound level.
To listen through the headphones
● Connect the headphones plug to the n socket
at the front of the system.
➜ The speakers will be muted.
To switch off the volume temporarily
● Press MUTE on the remote control.
➜ Playback will continue without sound and
"MUTE" will be displayed.
● To restore the volume, press MUTE again or
increase the VOLUME level.
Sound Navigation
For optimal sound listening, select only one
of the following navigation sound controls
at a time : DSC, VAC or DBB.
DSC (Digital Sound Control)
The DSC feature enables you to adjust the
system to suit your type of music.
1 Press DSC.
➜ DSC button lights up
2 Adjust the JOG
CONTROL (or press
DSC on the remote control
repeatedly) to select the
desired Digital Sound
Control effect : DIGITAL, ROCK, POP, NEWAGE,
CLASSIC or ELECTRIC.
➜ The selected DSC will be highlighted.
Note:
– For a neutral sound effect, select CLASSIC.
VAC (Virtual Ambience Control)
The VAC feature enables you to adjust the
system to select a type of environment.
1 Press VAC.
➜ VAC button lights up.
2 Adjust the JOG
CONTROL (or press
VAC on the remote
control repeatedly) to
select the desired Virtual
Ambience Control effect : HALL, CONCERT,
CINEMA, DISCO, ARCADE or CYBER.
➜ The selected VAC will be highlighted.
Note:
– When you select VAC, the Dolby Pro Logic setting
will automatically switch to Dolby Center Phantom
mode.
V
A
C
D
S
C
D
B
B
V
A
C
D
S
C
D
B
B
Basic Functions
pg 001-031/P750/22-Eng 3/7/01, 4:13 PM16