User Manual

23
English
3139 115 20612
Note:
– Some RDS station may be transmitting a real
time clock at a minute interval. The accuracy of
the transmitted time depends on the transmitting
RDS station.
NEWS/TA (traffic announcement)
(only available in RDS radio station)
Once the News PTY (Programme Type) or TA
(Traffic Announcement) data is detected in a
RDS station, it will switch to TUNER mode
automatically.
IMPORTANT!
You can activate NEWS/TA function in
Standby, Demonstration or any source
mode except Tuner and Eco Power Standby
mode.
To start NEWS/TA function
1 Press NEWS/TA to select NEWS or TA
function.
➜ If NEWS is selected, "NEWS" and NEWS will
appear on the display.
➜ If TA is selected, "TA" and TA will appear on
the display.
➜ It will scan the radio stations stored in the
first 5 preset and wait for the News Programme
Type/Traffic Announcement data to be available
in any of these RDS radio stations.
● If no RDS station is detected in the first 5
presets, the system will exit NEWS/TA function.
➜ "NO RDS NEWS" or "NO RDS TA" will be
displayed and NEWS or TA will disappear from
the display.
2 When NEWS or TA transmission is detected, the
system will switch to Tuner mode automatically.
➜ NEWS or TA will start flashing.
Notes:
– You have to exit Tuner mode before selecting
NEWS/TA function.
– While searching NEWS/TA in progress, the
current source activity will remain uninterrupted.
– Before you activate the NEWS/TA feature,
ensure that the first 5 presets have RDS stations.
– The NEWS/TA works only once for each
activation.
– The NEWS/TA will not start if a recording is in
progress.
To cancel NEWS/TA function
● Press NEWS/TA again or press TUNER to
select tuner mode.
● During news bulletin or traffic announcement,
press any other available source keys to execute
the relevant source mode.
Radio Reception
pg 001-031/P750/22-Eng 3/7/01, 4:13 PM23