Operation Manual

Recording the microphone
1 Insert a CDR(W) which is absolutely free of scratches and
dust particles in the CD recorder tray.
2 Set MIC LEVEL to the minimum level to prevent acoustic
feedback (i.e. a loud howling sound) before you connect
the microphone.
3 Connect a microphone to MIC.
4 Press AUX repeatedly to select any external source you
like.
➜ AUX DIGITAL is displayed if the digital input is selected.
➜ AUX ANALOG H is displayed if the analogue input for a
standard level source is selected.
➜ AUX ANALOG L is displayed if the analogue input for a
low level source is selected.
5 Press RECORD on the set to enter the recording menu.
6 Rotate í JOG CONTROL ë to select MIC ONLY.
➜ The microphone will be recorded.
7 Press YES to confirm your selection.
➜ PREPARING is displayed.
➜ RECORD?, AUX and the remaining recording time of the
CDR(W) are displayed.
8 Set the optimal recording level on the CD recorder (see
“Adjusting the record level”).
00
In addition you can also set the optimal recording level of
the microphone by turning MIC LEVEL.
9 Press YES on the set to start recording.
➜ The CD recorder starts to record and RECORDING IN
SESSION is shown.The remaining recording time of the
CDR(W) is displayed.
10 Press Ç on the set to stop recording.
➜ UPDATE is displayed and RECORDING IN SESSION goes off.
External recording
22
English
DISPLA
Y
CL
O
CK
•T
IM
ER
CD RECORDER
C
D
R
O
P
E
N
•C
L
O
S
E
M
A
S
T
E
R
V
O
L
U
M
E
C
O
P
Y
C
D
C
O
M
PIL
E
C
D
RECORD
FINALIZE
ERASE
JOG
CONTROL
CD
O
N
•O
FF
L
EVE
L
MIC/
LEVEL
SOURCE
A
U
X
TUNER
CD
R
CD1
CD2
CD3
MIC