User Manual

17
3139 116 17601
English
– During programming , If no button is pressed within 20
seconds, the system will exit program mode
automatically.
Playing the program
1 Press PLAYÉto start program playback.
™ “PLAY PROGRAM” will be displayed.
™ The track number and elapsed playing time of the
current track will appear on the display.
• If you press REPEAT during program playback, the
current track will be played repeatedly.
™ The REPEAT and PROGRAM flags will be displayed.
2 Press STOPÇ to stop program playback.
Note:
– If you press any of the 3 CD DIRECT PLAY buttons, the
system will play the selected disc or track and the
stored program will be ignored temporarily. The
PROGRAM flag will also temporarily disappear from
the display and then reappear, when the playback for
the selected disc ends.
Reviewing the program
Reviewing of the program is only possible in the stop
mode.
• Press PREVí or NEXTë repeatedly to review the
programmed tracks.
• Press STOPÇ to exit review mode.
Erasing the program (in the stop mode)
• Press CLEAR on the system.
™ “PROGRAM CLEARED” will be displayed.
Note:
– The program will be erased when the system is
disconnected from the power supply. If the CD
carousel is opened, the tracks belonging to the outer
two trays will be erased and the display will show
“ CLEARED ”.
Shuffle (only on remote control)
It will play all the available discs and their tracks in
random order. Shuffle may also be used when tracks are
programmed.
To shuffle all the discs and tracks
1 Press SHUFFLE.
™ “SHUFFLE” will be displayed.
™ The SHUFFLE flag, the disc and the track selected
at random appear on the display.
• The discs and the tracks will now be played in random
order until you press STOPÇ.
• If you press REPEAT during shuffling, the current track
will be played repeatedly.
™ The REPEAT and SHUFFLE flags will be displayed.
2 Press SHUFFLE again to resume normal playback.
™ The SHUFFLE flag disappears from the display.
Note:
– All the available discs will be played once, then stop.
Repeat (only on remote control)
It will play the current track repeatedly.
1 Press REPEAT during playback.
™ “REPEAT TRACK” will be displayed.
™ The REPEAT flag and the track selected appear on
the display.
• The track will now be played repeatedly until you
press STOPÇ.
2 Press REPEAT again to resume normal playback.
™ The REPEAT flag disappears from the display.
CD
pg 001-27/FW775-765P/22-Eng 9/1/99, 9:37 AM17