User Manual

18
3139 116 17601
English
• When searching RDS station;
™ “SEARCH RDS STATION” will be displayed. If
no RDS station is available, the program will exit
automatically.
™ After a station is found, “EASY SET” will be
displayed and followed by “TIME”.
• When searching RDS time;
™ “SEARCH RDS TIME” will be displayed.
™ When RDS time is read, “RDS TIME” will be
displayed. The current time is displayed for 2
seconds and will be stored automatically.
Notes :
– When EASY SET is used, all previously stored stations
will be erased.
– The last preset station or the first available RDS will
appear on the display when Easy Set is completed.
TUNER
Easy Set (only in Standby or Demonstration mode)
EASY SET allows you to store all available radio stations
and RDS stations in a particular band (FM•MW•LW)
automatically.
1 Press and hold STANDBY•ON (on the system only)
for 2 seconds.
™ “EASY SET” will be displayed and followed by
“TUNER”.
™ Easy set will start with the last active band.
™ All available radio stations with sufficient signal
strength will be stored or until 40 presets are filled.
2 The system will search once again for the first
available RDS station and to set the RDS time
automatically.
SHUFFLE
REPEAT
AM
TIMER
PM
REC
HSDLW
MW
MAX
PHANTOM
3 STEREO
CD
TUNER
TAPE
AUX
PREV NEXT SEARCH
DUBBING
NORMAL • FAST
STOP
RECORD
Press 'STANDBY- ON' for 2 seconds to
set radio stations automatically
SETEASY
RADIO
MINI HIFI SYSTEM
FW 530C
CLOCK • TIMER
PROGRAM
VIDEO
CD
1 • 2 • 3 BAND
TAPE
1 • 2
REVERSE MODE
STANDBY
.
ON
SIDE A • B
CLEAR
PRESET
▲
▲
I S
PROGRAM
DBB
TUNING
▲ ▲
▲ ▲
RDS NEWS!
FM
STEREO
VOLUME
n
HOME CINEMA CONTROL
DIGITAL SOUND CONTROL
JAZZ
PRO LOGIC 3 STEREO
DOLBY PRO LOGIC
PHANTOM
DYNAMIC
BASS BOOST
INCREDIBLE
SURROUND
CLASSIC ROCK TECHNO
NEWS
PLAY
PAUSE
– If RDS station does not transmit RDS time
within 90 seconds, the program will exit automatically
and the display will show ” NO RDS TIME ” .
Tuning to Radio Stations
1 Press TUNER to select TUNER mode.
™ “TUNER“ will be displayed.
™ The preset number, frequency and waveband
appear on the display.
2 Press TUNER (BAND) again to select the desired
waveband : FM, MW or LW.
3 Press TUNING à or á for more than one second,
then release.
™ The display will show “SEARCH“ until a radio
station with sufficient signal strength is found.
• Repeat this procedure until the desired radio station is
reached.
• To tune to a weak station, briefly press TUNING à
or á until the display shows the desired frequency
and/or when the best reception has been obtained.
pg 001-27/FW775-765P/22-Eng 9/1/99, 9:37 AM18