User Manual

ManualsBrandsPhilips ManualsHome AudioFW775P/22

3139 116 17601

English

Storing Preset Radio Stations

You can store up to 40 radio stations in the memory.

When a preset radio station is selected, the preset

number appears next to the frequency on the display.

Automatic programming

1 Press TUNER.

2 Press TUNER (BAND) again to select the desired

waveband : FM, MW or LW.

3 Press PROGRAM for more than one second.

™ PROGRAM flag starts flashing and "AUTO" will be

displayed.

™ Every available radio station will be stored

automatically. The frequency and preset number

will be displayed briefly.

™ The system will stop searching when all the

available radio stations are stored or when the

memory for 40 preset radio stations is used.

™ The system will remain tuned to the last stored

preset radio station.

• Repeat the above procedure to store other preset

stations for the other waveband. Remember to select

the next available preset number before proceeding. If

not, some of the preset radio stations may be erased.

Notes:

– You can cancel the automatic programming by

pressing PROGRAM or STOP

– If you want to reserve a section of preset numbers, for

example preset numbers 1 to 9, select preset 10

before starting automatic programming: now only the

preset numbers 10 to 40 will be programmed.

Manual programming

1 Press TUNER.

2 Press TUNER (BAND) to select the desired

waveband: FM, MW or LW.

3 Press PROGRAM for less than one second.

™ PROGRAM flag, the frequency and preset station

number start flashing.

™ The next available preset number will be displayed

for selection.

4 Press TUNING à or á to tune to the desired

frequency.

• When all 40 presets are stored, no preset number is

shown.

™ The message “PROGRAM FULL” will be

displayed.

• If you wish to store the radio station to another preset

number, press PRESET 4 or 3 to select the desired

preset number.

5 Press PROGRAM again.

™ PROGRAM flag will stop flashing, and the radio

station will be stored.

• Repeat the above procedure to store other preset radio

stations.

Notes:

– You can cancel the manual programming by pressing

STOP

– During programming , If no button is pressed within 20

seconds, the system will exit program mode

automatically.

TUNER

Tuning to Preset Radio Stations

• Press PRESET 4 or 3 to select the desired preset

number.

™ The preset number, frequency and waveband

appear on the display.

pg 001-27/FW775-765P/22-Eng 9/1/99, 9:37 AM19