User Manual

22
3139 116 17601
English
Rewind/Fast Forward (only on tape deck 2)
At the stop mode
1 You can rewind or fast forward the tape by pressing
à or á respectively.
™ “OOO or PPP” will be displayed depending on which
button is pressed.
™ The tape will stop automatically at the end of the
rewinding or fast forwarding.
2 Press STOP Ç to stop rewind or fast forward.
During playback
• Press and hold à or á respectively until the desired
passage is located.
™ During searching, the sound is reduced to a low
volume.
™ When you release à or á, the tape continues
playing.
Notes:
– During rewinding or fast forwarding of a tape, it is
possible to select another source (e.g. CD, TUNER or
AUX mode).
– Check and tighten slack tape with a pencil before use.
Slack tape may get jammed or may burst in the
mechanism.
– C-120 tape is extremely thin and is easily deformed or
damaged. It is not recommended for use in this
system.
– Store the tapes at room temperature and do not put
them too close to a magnetic field (for example, a
transformer, TV or loudspeaker boxes).
.
Selecting External Equipment
If you have connected the audio out terminals of the
external equipment (TV, VCR, Laser Disc or DVD player) to
the AUX IN terminals, you can hear the sound from the
system.
• Press AUX to select the external mode.
™ “AUX” will be displayed.
Note:
– All the sound control features (e.g. DSC, DBB, etc.) are
available for selection.
STEREO
NEWS
FM
PROGRAM
SHUFFLE
REPEAT
AM
TIMER
PM
REC
HSDLW
MW
MAX
PHANTOM
3 STEREO
CD
TUNER
TAPE
AUX
PREV NEXT SEARCH
N
O
STOP
RECORD
MINI HIFI SYSTEM
FW 530C
CLOCK • TIMER
VIDEO
CD
1 • 2 • 3 BAND
TAPE
1 • 2
SIDE A • B
CLEAR
PRESET
▲
▲
I S
DBB
TUNING
▲ ▲
▲ ▲
PLAY
PAUSE
TAPE AUX RECORDING
IT IS RECOMMENDED THAT YOU SWITCH OFF
DOLBY PRO LOGIC WHEN RECORDING.
Notes:
– For recording, use only tape of IEC type I (normal tape)
or IEC type II (Chrome).
– The tape is secured at both ends with leader tape. At
the beginning and end of tape, nothing will be
recorded for six to seven seconds.
– The recording level is set automatically, regardless of
the position of VOLUME, DBB or Incredible Surround.
– To prevent accidental recording, break out the tab on
the left shoulder of the tape side you want to protect.
– If “ CHECK TAPE ” is displayed, the protection tab
has been broken. Put a piece of clear adhesive tape
over the opening. Do not cover the CrO
2
tape detection
hole when covering the tab opening.
One Touch Recording
• For One Touch Recording, as soon as you press
RECORD, the current source will be recorded on tape
deck 2.
1 Load a blank tape in tape deck 2.
2 Press RECORD to start recording.
™ The REC flag starts flashing.
3 Press STOPÇ to stop recording.
Note:
– When you press RECORD at TAPE mode, " SELECT
OTHER SOURCE " will be displayed. One Touch
Recording is not possible at TAPE mode.
pg 001-27/FW775-765P/22-Eng 9/1/99, 9:38 AM22