operation manual

13
English
AUTO SOUND CALIBRATION (ASC)
Whenever a new DSC or VEC feature is
selected. The ASC will automatically
calibrate the new sound inorder to give a
smooth transition.
1 Press DSC or VEC.
™ The selected digital sound is
encircled.
2 Press MORE to switch the calibration
ON or OFF.
3 Press ENTER to confirm the selection.
™ “CALIBRATION ON" or
"CALIBRATION OFF” will be
displayed.
MAX SOUND
The MAX SOUND feature enables you to
unleash a maximum sound effect
combining the volume and DBB effect.
• Press MAX SOUND to switch on or off.
™ “MAX SOUND" or "OFF” will be
displayed.
PERSONAL SOUND
You can store upto 6 personal settings.
• Press PERSONAL to select USER 1,
USER 2, USER 3, USER 4, USER 5 or
USER 6.
™ “USER 1, USER 2, USER 3,
USER 4, USER 5 or USER
6” will be displayed.
Personal Setting
You can adjust the personal setting to your
desired level with the JOG.
1 Press and hold PERSONAL for about 5
seconds.
™ The personal setting mode is
switched on.
™ "60 HZ" will be displayed.
2 Rotate the JOG until the desired
equalizer band level.
™ The equalizer band level will be
displayed.
3 Press MORE to select the next equalizer
band.
60 HZ ™ 250 HZ ™
1 KHZ ™ 4 KHZ ™
16 KHZ ™ 60 HZ …
• Repeat 2 and 3 until all equalizer bands
are set.
4 Press ENTER to confirm the personal
setting.
™ “STORE UX” will be displayed.
"X" is the next available personal
setting .
• Press MORE to select the desired store
location.
5 Press ENTER to confirm the store
location.
• Repeat 1 – 5 to adjust the other
personal settings.
OPERATING THE SYSTEM
Rotate the JOG to adjust the speed of
the effect after selecting SURF,
STROBE, PAN or HOLD.
SURF
This feature allows you to simulate the
sound effect like an ocean wave as though
the music is surfing on top of the waves.
• Press SURF.
™ "SURF XX" will be displayed.
STROBE
This feature allows you to simulate a
stroboscopic sound effect as though the
music appears and disappears.
• Press STROBE.
™ "STRB XX" will be displayed.
PAN
This feature allows you to simulate a
panoramic sound effect as though the
music is circling through the room.
• Press PAN
™ "PAN XX" will be displayed.
HOLD
This feature allows you to simulate the
sound effect like scratching a vinyl LP
record and is only applicable during CD
play mode.
• Press HOLD.
™ "HOLD XX" will be displayed.
Notes:
–" XX " is the speed of the effect.
– All other sound effects will be switched
off when SURF, STROBE, PAN or HOLD
is selected.
DYNAMIC BASS BOOST (DBB)
There are three DBB settings to enhance
the bass response.
• Press DBB briefly to select a bass boost
level.
™ The respective DBB level is being
encircled and lit.
™ “BEAT, PUNCH or BLAST” will
be displayed.
To switch off DBB
• Press DBB briefly until “DBB OFF” is
displayed.
Note:
– Some CDs or tapes might be recorded in
high modulation. It may cause distortion
at high volume. If this occurs, switch off
DBB or reduce the volume.
Automatic DSC-DBB selection
The best DBB setting is generated
automatically for each DSC selection. You
can manually select the DBB setting that
best suits your listening environment.