operation manual
9
English
Controls on the system and
remote control
1 STANDBY ON
– to switch the system on or to standby
mode.
– to use for EASY SET.
2 LOW POWER STANDBY LED
– lit up during low power standby.
3 JOG
– to select the desired equalizer display.
– to select the desired DSC setting. You
must select the DSC feature first.
– to select the desired level of Personal
Sound. You must select the
PERSONAL Sound setting first.
– to select the desired VEC setting. You
must select the VEC feature first.
4 n
– to connect headphones.
5 REC (RECORD)
– to start recording on tape deck 2.
6 DUB (HIGH SPEED DUBBING
[HSD])
– to dub a tape in normal or fast speed.
7 MORE
– to switch the calibration status on or
off.
– to select personal equalizer band for
adjustment.
– to select personal equalizer setting for
storing.
8 ENTER
– to confirm the calibration status.
– to store the personal equalizer band.
– to store and confirm the personal
equalizer setting.
9 CLOCK/TIMER
– to view the clock, set the clock or set
the timer.
0 PROG (PROGRAM)
– to program CD tracks in CD mode or
preset radio stations in tuner mode.
! DISPLAY
– to view the current setting of the
system.
@ CD CAROUSEL TRAY
# CD DIRECT PLAY (DISC 1 / DISC 2 /
DISC 3)
– to select a CD tray for playback.
$ DISC CHANGE
– to change CD(s).
% OPEN•CLOSE
– to open or close the CD carousel.
^ SOURCE : to select the following:
CD / (CD 1•2•3)
– to select CD mode. When CD playback
is stopped, press to select the disc
tray 1, 2 or 3.
TUNER / (BAND)
– to select Tuner mode. When in Tuner
mode, press to select the waveband:
FM, MW or LW.
TAPE / (TAPE 1• 2)
– to select Tape mode. When tape
playback is stopped, press to select
either tape deck 1 or 2.
CONTROLS
AUX / (CDR)
– to select sound from an external
source (e.g. TV, VCR, Laser Disc player,
DVD player or CD Recorder). When in
Aux mode, press to select either AUX
or CDR.
& MODE SELECTION
à á (SEARCH •TUNING)
for CD ............ to search backward/
forward.
for TUNER ..... to tune to a lower or
higher radio frequency.
for TAPE ........ to rewind or fast
forward a tape.
Ç (STOP•CLEAR)
for CD ............ to stop CD playback or
to clear a program.
for TUNER ..... to stop programming.
for TAPE ........ to stop playback or
recording.
DEMO ...........
(on the system only)
to
start or stop
demonstration mode.
É Å (PLAY •SIDE)
for CD ............ to start or interrupt
playback.
for TAPE ........ to start playback.
...................... SIDE : When playing in
Tape 2 mode, to change
side.
í ë (PRESET 4 3 )
for CD ............ to skip to the beginning
of the current, previous,
or next track.
for TUNER ..... to select a preset radio
station in memory.
* SOUND DISPLAY PANEL
– to view the selected Interactive Sound
Studio setting.
( DOLBY B NR
– to switch on or off Dolby NR.
) RDS/CD TEXT
for TUNER ..... to select RDS data in
the following order:
station name, program
type, radio text and
frequency.
for CD............to view the CD encoded
information.
(For
FW870C only)
¡ NEWS/TA
– to hear News or Traffic Announcement
data when it is available.
™ A. REV (AUTO REVERSE)
– available in tape deck 2 only.
– to select the desired play modes ( å /
∂ / ∫ ).
£ MAX SOUND
– to switch on or off MAX sound for
extra bass.
≤ MIC LEVEL
– to adjust the mixing level for karaoke
or microphone recording.
∞ MIC
– to connect microphone jack.
§ VOLUME
– to adjust the volume.
≥ OPEN
– to open tape deck 2.
• TAPE DECK 2