DVD Mini-HiFi System pg 001-028_FWD132-98_Eng 1 FWD132 2007.5.
CAUTION Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. 2 pg 001-028_FWD132-98_Eng 2 2007.5.
English Index English ------------------------------------------------ 4 -------------------------------------------------------- 29 Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries. This product incorporates copyright protection technology that is protected by method claims of certain U.S.
Contents English To cancel Shuffle mode: ........................................... 15 Repeating a section within a chapter/track ........ 16 General Information/ Maintenance Features .................................................................. 5 Discs for playback ................................................ 5 Region codes ............................................................... 5 Supplied accessories ............................................ 5 Environmental information ............
English General Information/Maintenance Features Region codes Your DVD Mini Hi-Fi System with 2-channel full analog amplifier creates the same dynamic sound qualities that you find in full-fledged cinemas and incorporates some of the best features in home theater technology. DVDs must be labeled for ALL regions or for Region 3 in order to play on this system. You cannot play discs that are labeled for other regions. Other features include: Bullt-In Dolby Digital decoder,supporting stereo.
General Information/Maintenance English Care and safety information ● ● ● ● Avoid high temperatures, moisture, water and dust Do not expose the system, batteries or discs to humidity, rain, sand or excessive heat (caused by heating equipment or direct sunlight). Always keep disc trays closed to avoid dust buildup on the lens. No objects filled with liquids, such as vases, shall be placed on the apparatus. No naked flame sources, such as lighted candles, should be placed on the apparatus.
Step 1: Placing speakers English Connections Step 2: Connecting speakers Connect the speaker wires to the SPEAKERS (FRONT) terminals, right speaker to “R” and left speaker to “L”, coloured (marked) wire to “+” and black (unmarked) wire to “–”. Fully insert the stripped portion of the speaker wire into the terminal as shown. Place the front left and right speakers at equal distances from the TV set and at an angle of approximately 45 degrees from the listening position.
Connections English Step 3: Connecting TV set IN Step 4: Connecting the power cord OUT COMPONENT VIDEO IN AUDIO OUT S-VIDEO IN Pr/Cr ~ AC MA INS Pb/Cb VIDEO IN Y IMPORTANT! – Connect the system directly to the TV set. After everything is connected properly, plug in the AC power cord to the power outlet.
1 English Functional Overview 12 2 WMA 13 3 4 14 5 15 6 7 8 9 10 18 19 22 Controls on the system 1 STANDBY ON – to switch the system on or to standby mode. 2 DISC TRAY 3 iR – point the remote control towards this sensor. 4 VOLUME (4/3) – to increase or decrease the volume. 5 DBB – to enhance the bass response. 6%PREV/NEXT( S / T ) – to select previous/next title,chapter or track. during playback. – to skip to beginning of current title, chapter or track.
Functional Overview English Remote control Notes: – First, select the source you wish to control by pushing the source switch to one of the source on the panel (DISC or TUNER, for example). – Then select the desired function (I1 or ¡I for example). 1 – 2 – 3 – 4 – 5 – – 2 to switch the system on or to standby mode. Numeric Keypad (0-9) to enter a track/title number of the disc.
IMPORTANT! – Make sure to complete the preparation procedures before operating the system. Step 1: Inserting batteries into the remote control 3 Step 2: Setting the TV set IMPORTANT! – Make sure you have completed all the necessary connections. 1 2 1 2 1 2 3 Open the battery compartment. 2 3 Push the source switch on the front panel to DISC. Turn on the TV set and set to the correct VideoIn channel. You should see the blue Philips DVD background screen on the TV set.
Preparations English PAL – Select this if the connected TV set is PAL system. It will change the video signal of an NTSC disc and output to PAL format. Step 3: Setting language preference You can select your preferred language settings so that this DVD Mini Hi-Fi System will automatically switch to the language for you whenever you load a disc. If the language selected is not available on the disc, the language set by default will be used instead.
Switching on/off Selecting DBB effect Switching the system ON To enhance the bass response, press DBB once or more to select your option: DBB ON, DBB OFF. In Standby ● Press STANDBY ON ➜ The system will go back to its previous status. Switching the system to STANDBY mode In any other source mode ● Press STANDBY ON (or 2 on the remote control).
Disc Operations English IMPORTANT! – This system is designed for regular discs. Therefore, do not use any accessories such as disc stabiliser rings or disc treatment sheets, etc., as offered on the market, because they may jam the disc mechanism. – Do not move the system during playback. Doing so may damage the system. – Do not push on the disc tray or put any object other than disc on the disc tray. Doing so may cause the system to malfunction.
Skipping to another title (track)/ chapter For DVD/VCD ● During playback, press I1 to playback the beginning of the current title (track)/chapter, press I1 twice in 2 seconds to skip to previous title (track)/chapter, and press ¡I to skip to next title (track)/chapter. Notes: – Resume information will be erased if you have changed the disc, opened the disc tray, changed source or disconnected the system from the power supply. – This function is not available for MP3/WMA disc.
Disc Operations English Repeating a section within a chapter/ track You can play a specific section in a chapter/track repeatedly. 1 Press REPEAT A-B at your chosen start point. 2 Press REPEAT A-B again at your chosen end point. ➜ The passage will now repeat continuously. 3 To resume normal play, press REPEAT A-B again. 3 4 5 To stop playback, press 7 once. To exit the program mode, press 7 again.
For JPEG: PLAY... ● Press ZOOM to change the picture zooming scale: ZOOM X100% pZOOM X125% pZOOM X150% pZOOM X200% pZOOM X75% pZOOM X50%p (ZOOM OFF)... ● To pan through the enlarged image,press 1 / 2 / 5 / 4 buttons to move the zoomed picture left, right, up or down. For VCD 2 3 ● Press ZOOM repeatedly to exit ZOOM mode. Changing sound track language ● Press AUDIO to select the desired language. For VCD: ● Press AUDIO to select the desired audio channels for sound.
Disc Operations English Moving to another title/chapter Some discs may contain more than one title or chapter. If the disc has a title or chapter menu recorded on it, you can start playback from the selected item. 1 Press DISPLAY/OSD on the remote control to display the message of title and chapter. 2 Use 5 / 4 to highlight a title/chapter item and press OK. 3 Use numeric keys (0-9) to select a desired title/chapter number. 4 Press DISPLAY/OSD to exit the disc information menu.
➜ 12 thumbnail pictures will appear on the TV screen. Playing MP3/Picture disc (Kodak, JPEG) IMPORTANT! – You have to turn on your TV set and set to the correct Video In channel. MP3/JPEG Picture disc 1 2 Load an MP3/Picture (JPEG) disc. ➜ The disc reading time may exceed 30 seconds due to complexity of the directory/file configuration. ➜ The disc menu appears on the TV. Select a track in the menu and press OK to start playback.
DVD Menu Operations English Using the setup menu (user preference settings) This DVD setup is carried out via your TV set, enabling you to customize the DVD Mini Hi-Fi System to suit your particular requirements. 1 In disc mode, press SYSTEM MENU. ➜ The setup menu will appear on the TV screen. ➜ Playback will pause. Setting the TV Display Make sure the format you need is available on the disc. If not, your setting will be invalid.
3 Setting the screen saver If set to ON, the screen saver will be activated when you leave the system in stop or pause mode for 5 minutes. The default setting is ON. Use the numeric keys (0-9) to enter your sixdigit code. ➜ The password supplied by default is 000000. ● Go to “Password” and enter your new code. Then, enter the same code again to confirm. PHILIPS PHILIPS General Setup Page OK 4 Changing the password Press SYSTEM MENU again to remove the menu.
DVD Menu Operations English Restricting playback by setting parental level Some DVDs may have a parental level assigned to the complete disc or to certain scenes on the disc. This feature lets you set a playback limitation level. The rating levels are from 1 to 8 and are country specific. You can prohibit the playing of certain discs that are not suitable for your children or have certain discs played with alternative scenes. 1 2 In disc stop mode, press SYSTEM MENU.
English Tuner Operations Tuning to radio stations 1 2 3 Push the source switch to TUNER. Turn the TUNING knob on the system until the frequency indication starts to change. ➜ The current radio frequency will appear on the display. To tune to a weak station, turn the TUNING knob to search until a radio station with sufficient signal strength is found. Notes: – The FM antenna is fixed in the system. Tape Operation/Recording IMPORTANT! – Before playing a tape, check and tighten slack tape with a pencil.
Tape Operation/Recording English IMPORTANT! – Recording is permissible if copyright or other rights of third parties are not infringed upon. – Recording is possible only in tape deck. General information on recording ● For recording, only use tape of IEC type I(normal tape). ● The recording level is set automatically, regardless of the position of the Volume, Vocal, Key control and so forth. ● The type is secured at both ends with leader tape.
AMPLIFIER Output power .................................... 1200 W PMPO 2.0 CH mode ................................... 2 X 30W RMS Frequency Response . 100 Hz - 10 kHz / ± 3 dB Signal-to-Noise Ratio > 62dB (A-WEIGHED) Output Sensitivity Line Out ............................................................. 2+ 0.2 V TUNER Tuning Range ........................................................................... ............................................................ FM 87.
Troubleshooting English WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help. Problem Solution ✔ Check if the AC power cord is properly No power. connected.
Problem Solution The language for the sound or subtitle cannot be changed when playing a DVD. ✔ Multi-language sound or subtitle is not recorded on the DVD. ✔ Changing the language for the sound or subtitle is prohibited on the DVD. No image is output when a function is selected. ✔ Make sure the component is connected correctly. ✔ Press the correct function button for the input source. Sound cannot be heard or is of poor quality ✔ ✔ ✔ ✔ ✔ Poor radio reception.
Glossary English Analog: Sound that has not been turned into numbers. Analog sound varies, while digital sound has specific numerical values. These jacks send audio through two channels, the left and right. Aspect ratio: The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of conventional TVs. is 4:3, and that of wide-screens is 16:9. AUDIO OUT Jacks: Jacks on the back of the DVD System that send audio to another system (TV set, Stereo, etc.).
Meet Philips at the Internet http://www.philips.com English FWD132 CLASS 1 LASER PRODUCT Printed in China PageBack_FWD132_98 94 PDCC-JS-JW-0717 2007.5.