User manual
English
13
Basic Functions
Demonstration mode
The system has a demonstration mode that
shows the various features offered by the system.
To activate the demonstration
● In standby mode, press and hold STOPÇ for
5 seconds to switch to demonstration.
To deactivate the demonstration
● Press and hold STOPÇ for 5 seconds to
switch to standby mode.
Switching the system on
● Press STANDBY-ON 2.
➜ The system will switch to the last selected
source.
● Press DISC (CD 1/2/3), TUNER, TAPE or
AUX.
➜ The system will switch to the selected source.
● Press OPEN•CLOSE or DISC CHANGE.
➜ The system will switch to the disc source and
the disc tray will open.
Switching the system to standby
mode
In demonstration mode
● Press and hold Ç on the system.
In any other source mode
● Press STANDBY ON B.
➜ The clock will appear on the display when the
system is in standby mode.
Power-saving automatic standby
As a power-saving feature, the system will
automatically switch to Standby mode if you do
not press any buttons within 15 minutes after a
disc or tape has stopped playing.
Dim mode
You can select the desired brightness for the
display.
● In any source mode (except standby mode),
press DIM MODE repeatedly to select DIM 1,
DIM 2, DIM 3 or DIM OFF display mode.
➜ DIM is shown, except for DIM OFF mode.
Volume control
Adjust VOLUME to increase (turn knob
clockwise or press VOLUME + on the remote)
or decrease (turn knob anti-clockwise or press
VOLUME - on the remote) the sound level.
To listen through the headphones
● Connect the headphones plug to
the n socket at the front of the
system.
➜ The speakers will be muted.
To switch off the volume
temporarily
● Press MUTE on the remote control.
➜ Playback will continue without sound and
"MUTE" is displayed.
● To restore the volume, press MUTE again or
increase the volume level.
pg001-027_M352/371_55_Eng 2006.1.4, 16:1913