User Guide

3
Storage
1 Remove the mains plug from the wall socket.
2 Wind the mains cord around the cord storage facility (fig. 3
3 Always store the iron standing on its heel in a safe and dry place.
Guarantee & service
If you need information or if you have a problem, please visit the Philips Web site at
www.philips.com or contact the Philips Customer Care Centre in your country (you
will find its phone number in the worldwide guarantee leaflet). If there is no Customer
Care Centre in your country, turn to your local Philips dealer or contact the Service
Department of Philips Domestic Appliances and Personal Care BV.
Trouble shooting guide
This chapter summarizes the most common problems you could encounter with your
iron. Please read the different sections for more details. If you are unable to solve the
problem, please contact the nearest Philips Service Centre or one of its
representatives. See the worldwide guarantee leaflet for telephone numbers of the
Philips Helpdesk or visit our website at www.philipsonline.com.
Solution
Check the mains cord, the plug
and the wall socket.
See setting the temperature
section for appropriate
temperature setting.
Possible cause(s)
Connection problem.
The temperature control
dial is probably set at
minimum position.
Problem
The iron is plugged in
but the soleplate is cold.
High Rating (for Hong Kong and Saudi Arabia only)
Rated Current
4.3-4.6A
Rated wattage
950-1100W
Rated voltage
220-240V
Low Rating (for Saudi Arabia only)
Rated Wattage
750-1000W
Rated Current
6.8-7.9A
Rated voltage
110-127V
Rated frequency
~50-60Hz
Rated frequency
~50-60Hz
4239 000 47785
3/14