User manual

Problem Possible cause Solution
Water drips from
the soleplate
after the iron has
cooled down or
has been stored.
You have put the iron
in horizontal position
while there was still
water in the water
tank.
Empty the water tank and set the
steam control to position O after
use. Store the iron on its heel.
Water spots
appear on the
garment during
ironing.
These wet spots may
be caused by steam
that has condensed
onto the ironing board.
Iron wet spots without steam from
time to time to dry them.
If the underside of the
ironing board is wet,
wipe it dry with a piece
of dry cloth.
To prevent steam from condensing
onto the ironing board, use an
ironing board with a wire mesh top.
4
4239.000.7223.2