User Manual

Important
Read these instructions for use carefully and look at the illustrations
before you start using the appliance.
Save these instructions for use for future reference.
◗ Check if the voltage indicated on the type plate corresponds to
the local mains voltage before you connect the appliance.
◗ Never leave the iron unattended when it is connected to the
mains.
◗ Young children should not be allowed to use the appliance without
supervision. Keep an eye on children to make sure that they do
not play with the appliance.
◗ The soleplate of the iron can become extremely hot and may
cause burns if touched. Do not allow the cord to come into
contact with the soleplate when it is hot.
◗ When you have finished ironing, when you clean the appliance,
when you fill or empty the water tank and also when you leave the
iron even for a short while: set the steam control to position O,
put the iron on its heel and remove the mains plug from the wall
socket.
◗ If the mains cord of this appliance is damaged, it must always be
replaced by Philips or a service centre authorised by Philips in
order to avoid hazardous situations.
◗ Never use the appliance if it is damaged in any way.
◗ This appliance is intended for household use only.
Before first use
1 Check if the voltage indicated on the type plate corresponds to
the local mains voltage before you connect the appliance.
C
2 Remove any sticker or protective foil from the soleplate.
3 Heat up the iron to maximum temperature and pass the iron
over a piece of damp cloth for several minutes to remove any
residues from the soleplate.
The iron may give off some smoke when you use it for the first time
This will cease after a short while.
ENGLISH4