User manual

Problem Possible cause Solution
You have not
closed the cap of
the lling opening
properly.
Press the cap until you hear a
click.
Flakes and
impurities
come out of
the soleplate
during ironing.
Hard water forms
akes inside the
soleplate.
Use the Calc-Clean function one
or more times (see chapter
‘Cleaning and maintenance’,
section ‘Calc-Clean function’).
The
temperature
light ashes
red (specic
types only).
The
automatic shut-off
function has
switched off the
iron (see chapter
‘Features’).
Move the iron slightly to
deactivate the automatic shut-off
function. The red auto-off
indication of the temperature
light goes out.
Water drips
from the
soleplate after
the iron has
cooled down
or has been
stored
(specic types
only)
You have put the
iron in horizontal
position while
there was still
water in the
water tank.
Always set the steam control to
position 0 and empty the water
tank after use. Store the iron on
its heel.
The iron does
not produce a
steam boost.
You used the
steam boost
function too often
within a short
period.
Continue ironing in horizontal
position and wait a while before
you use the steam boost function
again..
ENGLISH 15