User manual

Vertical steam boost
1 Youcanalsousethesteamboost
functionwhenyouholdtheironinvertical
position.
This is useful for removing creases from hanging
clothes, curtains etc.
Never direct the steam at people.
Drip stop
This iron is equipped with a drip-stop function: the
iron automatically stops producing steam when
the temperature is too low, to prevent water from
dripping out of the soleplate. When this happens,
you may hear a sound.
Automatic shut-off function (specic types only)
The automatic shut-off function automatically switches
off the iron if it has not been moved for a while.
, Theredauto-offlightashestoindicatethat
theironhasbeenswitchedoffbytheautomatic
shut-offfunction.
To let the iron heat up again:
1 Pickuptheironormoveitslightly.
, Theredauto-offlightgoesout.
, Ifthetemperatureofthesoleplatehasdropped
belowthesetironingtemperature,theamber
temperaturelightgoeson.
2 Iftheambertemperaturelightgoesonafter
youhavemovedtheiron,waitforittogoout
beforeyoustartironing.
Note: If the amber temperature light does not go on
after you move the iron, the soleplate still has the right
temperature and the iron is ready for use.
ENGLISH 15