Operation Manual

34
Problem
Possible cause Solution
The appliance
produces no steam
or irregular steam.
The steamer has not
heatedupsufciently.
Steam has condensed in
the hose.
The water level is below
the MIN level indication
orthetankisnot
inserted properly.
Too much scale has built
up in the appliance.
Let the appliance heat up for
approximately45seconds.Use
forfasterheatup(GC536only).
Lift the steamer head to straighten
the hose vertically. This allows any
condensationtoowback.
Rellthewatertankandinsertit
properlyuntilyouheara“click”
sound.
Perform easy rinse process. Refer
to section.
Water droplets drip
from the steamer
head or the appliance
producesacroaking
sound.
You have left the
steamer head and/or
the steam supply hose in
horizontal position for a
long time.
When the hose forms a
U-shape, condensation
inthehosecannotow
backintothewatertank.
Lift the steamer head to straighten
the hose vertically. This allows any
condensationtoowback.
Lift the steamer head to straighten
the hose vertically. This allows any
condensationtoowback.
Anexcessiveamount
of water drips out
of the steamer head
when the appliance is
heating up.
The water in the
appliance is dirty or
has been left inside the
appliance for a long time.
Perform easy rinse process. Refer
to section.
Waterleaksoutfrom
the steamer base.
You have not closed the
watertankcaporeasy
rinseknobsecurely.
Thewatertankisnot
inserted properly.
Closethewatertankcapandeasy
rinseknobsecurely.
Insertthetankproperlyuntilyou
heara“click”sound.
A few water droplets
come out when
thewatertankis
detached.
This is part of the water
inlet design.
This is normal.
EN