User Guide
Table Of Contents
10
Problem Possible cause Solution
You have not done or have
process.
the steam function again (see chapter
‘Cleaning and maintenance’).
The appliance has
activated automatically. The
minutes.
up again.
The appliance produces a
loud pumping sound.
The water tank is empty.
the steam trigger until the pumping sound
the soleplate.
Water droplets come out
of the soleplate.
remaining water may drip out
of the soleplate.
Wipe the soleplate dry with a piece of
Clean process (see chapter ‘Cleaning and
maintenance’).
function too frequently.
process again (see chapter ‘Cleaning and
maintenance’).
Steam condenses into water in
the hose when you use steam
used it for a long time.
This is normal. Hold the iron away from the
garment and press the steam trigger.Wait
until steam instead of water comes out of
the soleplate.
Dirty water and impurities
come out of the soleplate.
Impurities or chemicals present
in the water have deposited
in the steam vents and/or
soleplate.
(see chapter ‘Cleaning and maintenance’).
Steam condenses into water in
the hose when you use steam
used it for a long time.
This is normal. Hold the iron away from the
garment and press the steam trigger.Wait
until steam instead of water comes out of
the soleplate.
soleplate.
You have accidentally started
(see chapter 'Cleaning and
maintenance').
the ‘iron ready’ light lights up steadily.
does not start.
until the appliance started
See chapter ‘Cleaning and maintenance’.
English