User Guide
12
5 During the Calc-Clean process, you hear short beeps and a pumping sound.
6 Wait approximately 2 minutes for the appliance to complete the process. When the
Calc-Clean process is completed, the iron stops beeping and the CALC-CLEAN light
stops ashing.
7 Wipe the iron with a piece of cloth and put it back on the base station.
Caution: The iron is hot.
8 As the Calc-Clean container becomes hot during the Calc-Clean process, wait approx.
5 minutes before you touch it. Then carry the Calc-Clean container to the sink, empty
it and store it for future use.
9 If necessary, you can repeat steps 1 to 8. Make sure that you empty the Calc-Clean
container before you start the Calc-Clean process.
Note: During the Calc-Clean process, clean water may come out of the soleplate if no
scale has accumulated inside the iron. This is normal.
For more information on how to carry out the Calc-Clean process, refer to the videos in
this link: http://www.philips.com/descaling-iron.
Cleaning the soleplate
To properly maintain your appliance, clean it regularly.
1 Clean the appliance with a moist cloth.
2 To easily and eectively remove stains, let the soleplate heat up and move the iron
over a moist cloth.
Tip: Clean the soleplate regularly to ensure smooth gliding.
2 min.
English