User Manual
Table Of Contents
7
The Optimal TEMP Technology enables you to iron all types of ironable fabrics, in any order, without
adjusting the iron temperature setting.
It is safe to just rest the hot soleplate directly on the ironing board (Fig. 4) without putting back to the
iron platform. This will help reduce the stress on your wrist.
- Fabrics with these symbols are ironable, for example linen, cotton, polyester, silk, wool, viscose and
rayon (Fig. 5).
- Fabrics with this symbol are not ironable. These fabrics include synthetic fabrics such as Spandex
garments (Fig. 6).
1 Place the steam generator on a stable and even surface.
2 Make sure that there is enough water in the water tank (see section ‘Filling the water tank’).
3
indicate that the appliance is heating up (this takes approx. 2 minutes) (Fig. 7).
, When the appliance is ready for use, the ‘iron ready light’ and the power-on light stop
4 Press the carry lock release button to unlock the iron from the iron platform (Fig. 8).
5 Press and hold the steam trigger to start ironing. (Fig. 9)
Never direct steam at people.
- Double press the steam trigger for a continuous shot of steam (Fig. 10). It is not necessary to press
and hold the steam trigger continuously when the steam boost function is activated. To stop the
steam boost function, press the steam trigger once.
Hot steam is emitted from the iron. Never attempt to remove creases from a garment that someone
is wearing. Do not apply steam near your or someone else’s hand.
You can use the iron in vertical position to remove wrinkles from hanging fabrics.
1 Hold the iron in vertical position, press the steam trigger and touch the garment slightly with
the soleplate (Fig. 11).
- By using the ECO mode (reduced amount of steam), you can save energy without compromising on
the ironing result. The green light is on (Fig. 12).
-
-