User manual

3 Press the plus or minus button to set the treatment time. If you
keep the button pressed, the time moves forward or backward
quickly (Fig. 11).
You can set a time from 1 to 60 minutes.
, The set session time is stored in the memory.
, The timer-on indication and the timer countdown time stop
ashing.
Note: When you switch on the appliance, the timer counts down the set time.
When the countdown is nished, the LED panel switches off automatically.
Demo mode
The demo mode is used to demonstrate the goLITE BLU energy light in
shops. When the appliance is switched on in demo mode, customers of
the shop can:
- adjust the light intensity
- switch the appliance on and off
- set the alarm
- set the treatment time
If the appliance is not operated for 3 minutes, it reverts to its demo
mode default settings.
To activate the demo mode:
1 Make sure the appliance is switched off.
Note: If you want to switch off the appliance, press and hold the on/off
button for 2 seconds.
2 Put the adapter in the wall socket and insert the appliance plug into
socket on the appliance.
3 Press and hold the on/off button for 10 seconds (Fig. 8).
, The appliance switches on and the word ‘DEMO’ appears on the
display.
, The LED panel goes on at a light intensity of 25%.
, The display shows a timer countdown time of 15 minutes, but the
timer does not count down. It only starts to count down when the
timer time is adjusted.
ENGLISH16